Skip to page content
USDA Forest Service
  
Treesearch

Research & Development Treesearch

 
Treesearch Home
About Treesearch
Contact Us
Research & Development
Forest Products Lab
International Institute of Tropical Forestry
Northern
Pacific Northwest
Pacific Southwest
Rocky Mountain
Southern Research Station
Help
 

GeoTreesearch


Science.gov - We Participate


USA.gov  Government Made Easy


Global Forest Information Service

US Forest Service
P.O. Box 96090
Washington, D.C.
20090-6090

(202) 205-8333

You are here: Home / Search / Publication Information
Bookmark and Share

Publication Information

(818 KB)

Title: Study of overlength on red oak lumber drying quality and rough mill yield

Author: Bond, Brian; Wiedenbeck, Janice

Date: 2006

Source: Forest Products Journal 56(10):15-19

Publication Series: Scientific Journal (JRNL)

Description: Lumber stacking practices can directly affect drying defects, drying rate, and moisture content uniformity. The effect of overlength on drying is generally thought to be detrimental, yet large volumes of overlength lumber are used by secondary manufacturers. Managers of secondary manufacturing facilities need quantitative information to assist them in determining if overlength is beneficial or detrimental to their operation. The goal of this research was to compare the drying degrade, kiln capacities, and rough mill yields of red oak lumber with overlength to lumber that was precision-end trimmed. Degrade and rough mill yield studies where conducted at four manufacturing facilities located within Tennessee, Kentucky, and Virginia. Each facility used predriers prior to kiln-drying red oak. Differences in kiln capacities for precision end-trimmed vs. nonprecision end-trimmed Lumber were determined from company records for previous kiln charges that were composed of one or the other type of lumber. The results of the four mill studies demonstrated that: 1) drying degrade was not significantly different between the two trimming and stacking practices; 2) kiln capacity can be increased by an average of 4 to 12 percent for precision-end trimmed lumber; and 3) using lumber with overlength leads to an increase in rough mill yield. A modified version of the ROMI-RIP rough mill simulation software was used to determine theoretical yield differences for different lumber grades and cutting bills. Simulation results indicated that there was a definite increase in rough mill yield for 1 Common lumber regardless of the difficulty of the cutting bill. For 2 Common lumber, yields were either not significantly different or higher for lumber with overlength, depending on the cutting bill.

Publication Notes:

  • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
  • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
  • This publication may be available in hard copy. Check the Northern Research Station web site to request a printed copy of this publication.
  • Our on-line publications are scanned and captured using Adobe Acrobat. During the capture process some typographical errors may occur. Please contact Sharon Hobrla, shobrla@fs.fed.us if you notice any errors which make this publication unusable.

XML: View XML

Citation:


Bond, Brian; Wiedenbeck, Janice 2006. Study of overlength on red oak lumber drying quality and rough mill yield. Forest Products Journal 56(10):15-19

 


 [ Get Acrobat ]  Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility

USDA logo which links to the department's national site. Forest Service logo which links to the agency's national site.