Skip to page content
USDA Forest Service
  
Treesearch

Research & Development Treesearch

 
Treesearch Home
About Treesearch
Contact Us
Research & Development
Forest Products Lab
International Institute of Tropical Forestry
Northern
Pacific Northwest
Pacific Southwest
Rocky Mountain
Southern Research Station
Help
 

GeoTreesearch


Science.gov - We Participate


USA.gov  Government Made Easy


Global Forest Information Service

US Forest Service
P.O. Box 96090
Washington, D.C.
20090-6090

(202) 205-8333

You are here: Home / Search / Publication Information
Bookmark and Share

Publication Information

(228 KB bytes)

Title: Detection of wetwood by ultrasonics

Author: Kabir, Mohammed F.; Leininger, Theodor D.; Araman, Philip A.; Winn, Matthew F.

Date: 2006

Source: Forest Products Journal 56(3): 70-74

Publication Series: Miscellaneous Publication

Description: Wetwood, or bacterially infected wood, is a severe processing problem and causes serious drying defects in lumber. The detection of wetwood is, therefore, important for proper processing and quality wood products. An investigation has been carried out to detect wetwood of cherrybark oak (Quercus pagoda Raf.), water oak (Quercus nigra, L.), hickory (Carya spp.), and eastern cottonwood (Populus deltoids, Bartr. ex Marsh.) using ultrasound signals. The ultrasound measurements were carried out at different moisture contents (MCs) in three different grain directions: longitudinal (L), radial (R), and tangential (T). Each ultrasonic waveform was characterized using eight ultrasonic variables: three involving time of flight, two involving ultrasound pulse energy, one using ultrasound pulse duration, and one for peak frequency. Linear positive correlations were found for most of the time of flight (TOF) measurements with MC. A significant strong correlation was found for TOF-energy. Wetwood exhibited higher MC than healthy wood for all species and higher specific gravity for hickory. Results also showed that wetwood has a higher TOF and greater loss of energy compared to healthy wood. The grain orientation has a significant effect on ultrasound signal propagation with the lowest TOF and energy loss in the L direction. This study suggests that wetwood in living trees as well as in lumber can be identified using ultrasound-based systems.

Publication Notes:

  • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
  • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
  • You may send email to pubrequest@fs.fed.us to request a hard copy of this publication. (Please specify exactly which publication you are requesting and your mailing address.)

XML: View XML

Citation:


Kabir, Mohammed F.; Leininger, Theodor D.; Araman, Philip A.; Winn, Matthew F. 2006. Detection of wetwood by ultrasonics. Forest Products Journal 56(3): 70-74

 


 [ Get Acrobat ]  Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility

USDA logo which links to the department's national site. Forest Service logo which links to the agency's national site.