You are here: Home
/ Publication Information
Title: The effects of crosscutting before gang-ripping on dimension part yields from no. 1 and 2A common red oak lumber
Author: Gatchell, Charles, J.; Wiedenbeck, Janice K. J.; Walker, Elizabeth S.; Walker, Elizabeth S.
Source: Forest Products Journal. 46(2): 61-66.
Description: Mills should have the option to crosscut red oak lumber prior to gang-ripping to remove crook and worthless material and to take advantage of the quality differences between board ends. At least half of No: 1 and 2A Common red oak boards will have end-to-end yield differences of at least 10 percent. Preprocessing will cause a slight decrease in overall yield but will allow greater control of the material fed to the gang ripsaw. It also appears that fewer short lengths will be generated from the better sections of the boards.
View or Print this Publication (1.5 MB)
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
- This publication may be available in hard copy. Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat. During the capture process some typographical errors may occur. Please contact Sharon Hobrla, email@example.com if you notice any errors which make this publication unusable.
Gatchell, Charles, J.; Wiedenbeck, Janice K.; Walker, Elizabeth S. 1996. The effects of crosscutting before gang-ripping on dimension part yields from no. 1 and 2A common red oak lumber. Forest Products Journal. 46(2): 61-66.
Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility