Title: Modeling and minimization of barium sulfate scale
Author: Rudie, Alan W.; Hart, Peter W.
Source: 2006 Engineering, Pulping, and Environmental Conference, Nov. 5-8, 2006, Atlanta, GA. Atlanta, GA : TAPPI, 2006:  pages.
Publication Series: Miscellaneous Publication
Description: The majority of the barium present in the pulping process exits the digester as barium carbonate. Barium carbonate dissolves in the bleach plant when the pH drops below 7 and, if barium and sulfate concentrations are too high, begins to precipitate as barium sulfate. Barium is difficult to control because a mill cannot avoid this carbonate-to-sulfate transition using common bleaching technology. An advantage in controlling barium scales is that the sulfate, once formed, will not redissolve to any appreciable extent, and this reduces the rate at which barite scale can form in other locations in the bleach plant. A mill has relatively few options for controlling barium sulfate scale. The first is to ensure very good debarking to minimize barium entering the mill with the wood. The second option is to minimize sulfate content of the first chlorine dioxide stage in the bleach plant. Sulfate is minimized through good brown stock washing and by using sulfuric acid for pH control instead of chlorine dioxide generator spent acid. Sulfate can also be reduced by operating the initial chlorine dioxide stage at higher pH, but this will work only in mills where calcium scales are not a concern. A third option is to use crystal modifiers (scale inhibitors). Scale inhibitors can be an expensive solution but are effective at delaying precipitation, and if the location can be moved from pumps and process piping into a tower, the impact of the scale is reduced. Because barium sulfate will not redissolve in the bleach plant, a barite deposit is less likely to reoccur somewhere else in the bleach plant.
Keywords: Barium carbonate, chlorine dioxide, bleaching, barium sulphate, water quality management, barium, water pollution, pulping, wood-pulp, bleaching, pulp mills, incrustations, scale, digesters, pulp and paper processes, trace metals
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
XML: View XML
Rudie, Alan W.; Hart, Peter W. 2006. Modeling and minimization of barium sulfate scale. 2006 Engineering, Pulping, and Environmental Conference, Nov. 5-8, 2006, Atlanta, GA. Atlanta, GA : TAPPI, 2006:  pages.
Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility