Skip to page content
USDA Forest Service
  
Treesearch

Research & Development Treesearch

 
Treesearch Home
About Treesearch
Contact Us
Research & Development
Forest Products Lab
International Institute of Tropical Forestry
Northern
Pacific Northwest
Pacific Southwest
Rocky Mountain
Southern Research Station
Help
 

GeoTreesearch


Science.gov - We Participate


USA.gov  Government Made Easy


Global Forest Information Service

US Forest Service
P.O. Box 96090
Washington, D.C.
20090-6090

(202) 205-8333

You are here: Home / Search / Publication Information
Bookmark and Share

Publication Information

(1.0 MB byte)

Title: Evaluating shrinkage of wood propellers in a high-temperature environment

Author: Bergman, Richard PhD; Ross, Robert J.;

Date: 2008

Source: Research Note FPL-RN-0309. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory. 9 p.

Publication Series: Research Note (RN)

Description: Minimizing wood shrinkage is a priority for many wood products in use, particularly engineered products manufactured to close tolerances, such as wood propellers for unmanned surveillance aircraft used in military operations. Those currently in service in the Middle East are experiencing performance problems as a consequence of wood shrinking during long-term storage at low equilibrium moisture content conditions prior to installation. To evaluate the extent of shrinkage, seven sugar maple (Acer saccharum) veneer propellers were dried from 11% to 3% moisture content in a controlled environment of 150°F (65°C) for 3 days. Two of these wood propellers were encased in polyethylene bags. Results showed 5 to 20 times more shrinkage for the thickness of the propeller hub and the hub face perpendicular to the propeller blades (across the grain), respectively, compared with the hub face parallel to the blades (along the grain). Two hubs, coated with aluminum oxide paint, showed dimensional changes similar to those observed for uncoated hubs. For the two wood propellers encased in polyethylene bags, moisture loss was slowed during the course of the experiment by roughly 46%. Wrapping the wood propellers prior to shipping would slow moisture desorption, thereby minimizing shrinkage during short-term storage. Processing the propellers at a lower equilibrium moisture content would minimize shrinkage during long-term storage.

Keywords: wood, propeller, shrinkage, sugar maple, veneer, equilibrium moisture content, EMC

Publication Notes:

  • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
  • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.

XML: View XML

Citation:


Bergman, Richard; Ross, Robert J. 2008. Evaluating shrinkage of wood propellers in a high-temperature environment. Research Note FPL-RN-0309. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory. 9 p.

 


 [ Get Acrobat ]  Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility

USDA logo which links to the department's national site. Forest Service logo which links to the agency's national site.