Skip to page content
USDA Forest Service
  
Treesearch

Research & Development Treesearch

 
Treesearch Home
About Treesearch
Contact Us
Research & Development
Forest Products Lab
International Institute of Tropical Forestry
Northern
Pacific Northwest
Pacific Southwest
Rocky Mountain
Southern
Help
 

GeoTreesearch


Science.gov - We Participate


USA.gov  Government Made Easy


Global Forest Information Service

US Forest Service
P.O. Box 96090
Washington, D.C.
20090-6090

(202) 205-8333

You are here: Home / Search / Publication Information
Bookmark and Share

Publication Information

(234 KB)

Title: Decay and termite resistance, water absorption and swelling of thermally compressed wood panels

Author: Unsal, Oner; Kartal, S. Nami; Candan, Zeki; Arango, Rachel A.; Clausen, Carol A.; Green, Frederick

Date: 2009

Source: International biodeterioration & biodegradation. Vol. 63, no. 5 (July 2009): p. 548-552.

Publication Series: Not categorized

Description: This study evaluated decay and termite resistance of thermally compressed pine wood panels under pressure at either 5 or 7 MPa and either 120 or 150 °C for 1 h. Wood specimens from the panels were exposed to laboratory decay resistance by using the wood degrading fungi, Gloeophyllum trabeum and Trametes versicolor. The thermal compression process caused increases in density and decreases in thickness of the panels: however, laboratory decay resistance revealed that thermally compressed wood was not resistant against the wood degrading fungi tested. More interesting results were found in laboratory termite resistance tests by using the Eastern subterranean termites, Reticulitermes flavipes. As pressure and temperature applied to the specimens increased to 7 MPa and 120 °C, mass losses in the specimens gradually decreased in comparison with control specimens. However, the specimens compressed at 7 MPa and 150 °C showed higher mass losses when compared to the specimens compressed at 7 MPa and 120 °C. The lowest water absorption and swelling rates were seen in the specimens exposed to a pressure of 7 MPa at 120 °C. The thermal compression process at 7 MPa and 150 °C resulted in the highest water absorption and swelling in the specimens.

Keywords: Heat treatment, pine, Pinus sylvestris, Scots pine, Reticulitermes flavipes, termites, wood deterioration, deterioration, biodegradation, pressure, Gloeophyllum trabeum, Trametes versicolor, pressure treatment, wood-decaying fungi, preserved wood, susceptibility, wood density, compressed wood, mechanical properties, wood moisture, moisture, absorption, Scotch pine, dimensional stability, swelling, termite control, resistance to decay, wood decay, decay fungi, treated wood, hot pressing, modified wood, hygroscopicity, moisture content, decomposition of wood, thermal compression, termite resistance, solid wood panels

Publication Notes:

  • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
  • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.

XML: View XML

Citation:


Unsal, Oner; Kartal, S. Nami; Candan, Zeki; Arango, Rachel A.; Clausen, Carol A.; Green, Frederick; 2009. Decay and termite resistance, water absorption and swelling of thermally compressed wood panels. International biodeterioration & biodegradation. Vol. 63, no. 5 (July 2009): p. 548-552.

 


 [ Get Acrobat ]  Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility

USDA logo which links to the department's national site. Forest Service logo which links to the agency's national site.