Title: Structure of diffusion flames from a vertical burner
Author: Finney, Mark A.; Jimenez, Dan; Cohen, Jack D.; Grenfell, Isaac C.; Wold, Cyle
Source: In: Viegas, D. X., ed. Proceedings of the VI International Conference on Forest Fire Research; 15-18 November 2010; Coimbra, Portugal. Coimbra, Portugal: University of Coimbra. 9 p.
Publication Series: Miscellaneous Publication
Description: Non-steady and turbulent flames are commonly observed to produce flame contacts with adjacent fuels during fire spread in a wide range of fuel bed depths. A stationary gas-fired burner (flame wall) was developed to begin study of flame edge variability along an analagous vertical fuel source. This flame wall is surrogate for a combustion interface at the edge of a deep (1.8 meters), vertically arranged fuel bed. Thermocouple and heat flux measurements along the flame wall indicate most of the variability in flame convection occurs at frequencies lower than 10-20 Hz. The variability and flame volume increased with increased height (turbulence) and fuel gas flow rate (flame mass).
Keywords: flames, turbulence, vertical burner, wall fire
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
- You may send email to firstname.lastname@example.org to request a hard copy of this publication. (Please specify exactly which publication you are requesting and your mailing address.)
XML: View XML
Finney, Mark A.; Jimenez, Dan; Cohen, Jack D.; Grenfell, Isaac C.; Wold, Cyle. 2010. Structure of diffusion flames from a vertical burner. In: Viegas, D. X., ed. Proceedings of the VI International Conference on Forest Fire Research; 15-18 November 2010; Coimbra, Portugal. Coimbra, Portugal: University of Coimbra. 9 p.
Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility