Skip to page content
USDA Forest Service
  
Treesearch

Research & Development Treesearch

 
Treesearch Home
About Treesearch
Contact Us
Research & Development
Forest Products Lab
International Institute of Tropical Forestry
Northern
Pacific Northwest
Pacific Southwest
Rocky Mountain
Southern Research Station
Help
 

GeoTreesearch


Science.gov - We Participate


USA.gov  Government Made Easy


Global Forest Information Service

US Forest Service
P.O. Box 96090
Washington, D.C.
20090-6090

(202) 205-8333

You are here: Home / Search / Publication Information
Bookmark and Share

Publication Information

(157 KB)

Title: Boron Diffusion in Surface-Treated Framing Lumber

Author: Lebow, Patricia K.; Lebow, Stan T.; Halverson, Steven A.

Date: 2013

Source: FOREST PRODUCTS JOURNAL Volume. 63, Number 7/8, 2013; pp. 275-282.

Publication Series: Scientific Journal (JRNL)

Description: The extent of boron penetration in framing lumber treated by spray applications during construction is not well quantified. This study evaluated the effect of formulation and concentration on diffusion of boron in lumber specimens that were equilibrated in conditions that produced wood moisture contents of 18 to 21 percent. One set of specimens was pressure treated with water before equilibration. Borate solutions were prepared from powdered disodium octaborate tetrahydrate (DOT) or from two commercial glycol-borate formulations and applied with a garden-type sprayer. The DOT solution was applied at a 15 percent concentration, while the glycol-borate formulations were applied at 15 and 23 percent concentrations. Boron penetration was evaluated after 6, 13, and 26 weeks and boron retention after 26 weeks of diffusion. Boron penetration was observed for all treatments and progressed for the duration of the study. There was no significant penetration difference between the powdered DOT and glycol-borate solutions when they were applied at the same (15%) DOT concentration. However, after 6 weeks, the glycol-borate solutions applied at the 23 percent DOT concentration produced significantly greater depth of penetration than the solutions applied at the 15 percent concentration. The exception was the 15 percent DOT solution applied to the specimens that had been wetted and then dried down to equilibrium conditions. These specimens had the greatest penetration, possibly as a result of their higher equilibrium moisture content. Retention analysis revealed that the glycol-borate solutions applied at the 23 percent DOT concentration yielded significantly greater boron retentions in the outer assay zone. This effect was less apparent for the inner assay zones. Although boron retentions in the outer assay zone were below those standardized for pressure-treated wood, in some cases they exceeded reported concentrations needed for protection against termites and decay fungi.

Keywords: borates, spray application, diffusion, penetration, framing lumber

Publication Notes:

  • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
  • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.

XML: View XML

Citation:


Lebow, Patricia K.; Lebow, Stan T.; Halverson, Steven A. 2013. Boron Diffusion in Surface-Treated Framing Lumber. FOREST PRODUCTS JOURNAL Volume. 63, Number 7/8, 2013; pp. 275-282.

 


 [ Get Acrobat ]  Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility

USDA logo which links to the department's national site. Forest Service logo which links to the agency's national site.