You are here: Home
/ Publication Information
Title: Furniture Cuttings Made from Logging Residue: The Three-Sided Cant System
Author: Reynolds, Hugh W.; Schroeder, James;
Source: Res. Pap. NE-417. Broomall, PA: U.S. Department of Agrirculture, Forest Service, Northeastern Forest Experiment Station. 4p.
Publication Series: Research Paper (RP)
Description: A new method to make furniture cuttings from the best of logging residues was tested. Bolts 4 through 8 feet long were sawed to three-sided cants. The cants were then resawed to boards and dried. The dried boards were gang ripped and defects removed to obtain clear-one-face cuttings of random width and length. The 6-, 7-, and 8-foot long bolts gave good yields by this system, while the 4- and 5-foot bolts did not.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
- This publication may be available in hard copy. Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat. During the capture process some typographical errors may occur. Please contact Sharon Hobrla, firstname.lastname@example.org if you notice any errors which make this publication unusable.
XML: View XML
Reynolds, Hugh W.; Schroeder, James 1978. Furniture Cuttings Made from Logging Residue: The Three-Sided Cant System. Res. Pap. NE-417. Broomall, PA: U.S. Department of Agrirculture, Forest Service, Northeastern Forest Experiment Station. 4p.
Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility