Skip to page content
USDA Forest Service
  
Treesearch

Research & Development Treesearch

 
Treesearch Home
About Treesearch
Contact Us
Research & Development
Forest Products Lab
International Institute of Tropical Forestry
Northern
Pacific Northwest
Pacific Southwest
Rocky Mountain
Southern Research Station
Help
 

Science.gov - We Participate


USA.gov  Government Made Easy


Global Forest Information Service

US Forest Service
P.O. Box 96090
Washington, D.C.
20090-6090

(202) 205-8333

You are here: Home / Search / Publication Information
Bookmark and Share

Publication Information

View PDF (2.6 MB)

Title: Bark thermal properties of selected central hardwood species

Author: Hengst, Gretel E.; Dawson, Jeffery O.;

Date: 1993

Source: In: Gillespie, Andrew R.; Parker, George R.; Pope, Phillip E.; Rink, George: eds. Proceedings of the 9th Central Hardwood Forest Conference; Gen. Tech. Rep. NC-161. St. Paul, MN: U.S. Department of Agriculture, Forest Service, North Central Forest Experiment Station: 55-75

Publication Series: General Technical Report (GTR)

   Note: This article is part of a larger document. View the larger document

Description: Some physical, thermal, and chemical properties of bark of eleven tree species native to the central hardwood region were measured to determine their potential to protect the vascular cambium from damage by fire. The relationship between dbh and bark thickness for each of sixteen species was determined. For purposes of monitoring seasonal trends, two species (Quercus macrocarpa Michx. and Acer saccharinum L.) were sampled periodically during one growing season. Heat transfer through bark tissue of eleven species was monitored during simulated fires conducted in the field. Bark samples were analyzed for moisture content, specific gravity, dry weight, and time until ignition, and subjected to standard test methods for determination of volatile matter content. Overall, heat flux and maximal cambial temperatures during simulated fires were reduced as bark thickness increased. Thick-barked species had lower maximal temperatures, longer times to reach peak temperatures, slower rates of heat loss, and shorter time until surface ignition. Populus deltoides Marsh. was the most fire resistant among species tested, while Acer saccharinum was the least. Specific gravity was positively correlated with thermal conductivity and likely influenced the rate at which cambial temperatures rose as well as the time required for surface ignition. Moisture content was lower in thin-barked species with higher specific gravities.

Publication Notes:

  • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
  • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
  • This publication may be available in hard copy. Check the Northern Research Station web site to request a printed copy of this publication.
  • Our on-line publications are scanned and captured using Adobe Acrobat. During the capture process some typographical errors may occur. Please contact Sharon Hobrla, shobrla@fs.fed.us if you notice any errors which make this publication unusable.

XML: View XML

Citation:


Hengst, Gretel E.; Dawson, Jeffery O. 1993. Bark thermal properties of selected central hardwood species. In: Gillespie, Andrew R.; Parker, George R.; Pope, Phillip E.; Rink, George: eds. Proceedings of the 9th Central Hardwood Forest Conference; Gen. Tech. Rep. NC-161. St. Paul, MN: U.S. Department of Agriculture, Forest Service, North Central Forest Experiment Station: 55-75

 


 [ Get Acrobat ]  Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility

USDA logo which links to the department's national site. Forest Service logo which links to the agency's national site.