Skip to page content
USDA Forest Service

Research & Development Treesearch

Treesearch Home
About Treesearch
Contact Us
Research & Development
Forest Products Lab
International Institute of Tropical Forestry
Pacific Northwest
Pacific Southwest
Rocky Mountain
Southern Research Station
Help - We Participate  Government Made Easy

Global Forest Information Service

US Forest Service
P.O. Box 96090
Washington, D.C.

(202) 205-8333

You are here: Home / Search / Publication Information
Bookmark and Share

Publication Information

View PDF (410 KB bytes)

Title: Gluability of out-of-service utility poles

Author: Roliadi, Han; Hse, Chung Y.; Choong, Elvin T.; Shupe, Todd F.;

Date: 2000

Source: Forest Prod. J. 50(10): 76-81

Publication Series: Miscellaneous Publication

Description: This investigation determined the gluability of weathered, out-of-service southern yellow pine (SYP) (Pinus spp.) utility poles. Three types of adhesives were used: resorcinol-phenol formaldehyde (RPF), polyvinyl acetate (PVA), and casein. The poles consisted of two service duration groups: 5 and 25 years. Longer weathering caused greater reduction in creosote content, especially in the outer andupperportions, but resulted in better gluability. Gluability of 25-year service life poles was the best and most comparable to untreated SYP. Five-year in-service poles and fi-eshly treated poles showed less favorable gluability. Superior gluability was obtained using RPF followed consecutively by PVA and casein. In reutilization of out-of-service poles into engineered wood products, pieces that have retained sufficient creosote to be effective against decay should be placed into ground contact. Similarly, pieces of poles with lower creosote content, and consequently better gluability, would be better utilized in non-ground contact areas of engineered wood products. Latewood percentage and angle of growth ring to the glueline also affected gluability. Latewood correlated positively with shear strength and negatively with wood failure. The lower the angle of the growth ring, the higher the shear and the greater the wood failure.

Publication Notes:

  • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
  • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
  • You may send email to to request a hard copy of this publication. (Please specify exactly which publication you are requesting and your mailing address.)



Roliadi, Han; Hse, Chung Y.; Choong, Elvin T.; Shupe, Todd F. 2000. Gluability of out-of-service utility poles. Forest Prod. J. 50(10): 76-81


 [ Get Acrobat ]  Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility

USDA logo which links to the department's national site. Forest Service logo which links to the agency's national site.