You are here: Home
/ Publication Information
Title: The SHOLO mill: make pallet parts and pulp chips from low-grade hardwoods
Author: Reynolds, Hugh W.; Gatchell, Charles J.; Gatchell, Charles J.;
Source: Res. Pap. NE-180. Upper Darby, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 16 p.
Publication Series: Research Paper (RP)
Description: SHOLO (from SHOrt Log) is a new solution to the old problem of profitably converting low-grade hardwood logs into products or product parts. It does away with the traditional and often uneconomical procedure of sawing low-grade logs into standard lumber and then converting this standard lumber into product parts. Instead, the SHOLO process is used to convert low-grade logs directly into product parts. In this report we describe the SHOLO process and give a specific example of one design of a SHOLO mill.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
- This publication may be available in hard copy. Check the Northern Research Station web site to request a printed copy of this publication.
- Our on-line publications are scanned and captured using Adobe Acrobat. During the capture process some typographical errors may occur. Please contact Sharon Hobrla, firstname.lastname@example.org if you notice any errors which make this publication unusable.
XML: View XML
Reynolds, Hugh W.; Gatchell, Charles J. 1970. The SHOLO mill: make pallet parts and pulp chips from low-grade hardwoods. Res. Pap. NE-180. Upper Darby, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experiment Station. 16 p.
Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility