Title: Laminating butt-jointed, log-run southern pine veneers into long beams of uniform high strength
Author: Koch, Peter; Woodson, G.E.;
Source: Forest Products Journal, Vol. 18(10): 45-51
Publication Series: Miscellaneous Publication
Description: Twenty laminated beams were constructed of log-run, butt-jointed, loblolly pine veneers 1|6 inch thick and 100 inches long. The beams were 18 inches deep, 2 inches wide, and 25 feet long. Veneers were arranged in the beams according to their modulus of elasticity (MOE). The stiffest were placed outermost, and the most limber in the center. The veneers, which were cut on a lathe, ranged in MOE from 510,000 to 2,960,000 psi and averaged 1,690,000 psi. This average was 110,000 psi lower than the accepted species average. The beams had an average effective MOE of 2,110,000 psi. Average modulus of rupture was 9,020 psi, with a 95-percent exclusion limit of 7,170 psi, thus justifying an allowable stress in bending of 3,370 psi. A single beam constructed on the same principle but made from veneers selected to simulate log-run slash pine had an MOE of 2,400,000 psi and an MOR of 10,080 psi. The three butt joints in each lamina did not seriously reduce beam MOE.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
- You may send email to email@example.com to request a hard copy of this publication. (Please specify exactly
which publication you are requesting and your mailing address.)
XML: View XML
Koch, Peter; Woodson, G.E. 1968. Laminating butt-jointed, log-run southern pine veneers into long beams of uniform high strength. Forest Products Journal, Vol. 18(10): 45-51
Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility