Skip to page content
USDA Forest Service
  
Treesearch

Research & Development Treesearch

 
Treesearch Home
About Treesearch
Contact Us
Research & Development
Forest Products Lab
International Institute of Tropical Forestry
Northern
Pacific Northwest
Pacific Southwest
Rocky Mountain
Southern Research Station
Help
 

Science.gov - We Participate


USA.gov  Government Made Easy


Global Forest Information Service

US Forest Service
P.O. Box 96090
Washington, D.C.
20090-6090

(202) 205-8333

You are here: Home / Search / Publication Information
Bookmark and Share

Publication Information

View PDF (1.31 MB bytes)

Title: Influence of resin formulation variables on bond quality of southern pine plywood

Author: Hse, Chung-Yun;

Date: 1972

Source: Forest Products Journal, Vol. 22(9): 104-108

Publication Series: Miscellaneous Publication

Description: Thirty-six resins, ach with two replicates, were factorially prepared with three forumlation variables: molar ratios of sodium hydroxide to phenol of 0.4, 0.7, and 1.0; levels of resin solids content of 37, 40, and 43 percent; and molar ratiios of formaldehyde to phenol of 1.6, 1.9, 2.2, and 2.5. Glue bond quality decreased substantially with a change of NaOH/phenol ratio from 0.4 to 0.7. A further change in ratio from 0.7 to 1.0 failed to affect it significantly, apparently because conversion of formaldehyde by the Cannizzaro reaction became important where more than half a mole of caustic was present in the reaction mixture. On the average, bond quality increased as solids content increased. Changes in CH2O/phenol ratio affected delamination but not wet shear strength or wood failure percentages; the lower molar ratios yielded gluelines that delaminated least. Latewood-to-latewood delaminated substantially more than earlywood-to-earlywood gluelines. Of 72 batches of resins, two met the woodfailure standard for exterior gluelines. Three yielded latewood-to-latewood gluelines that averaged less than 20 percent delamination in 3 months of outdoor exposure in central Louisiana.

Publication Notes:

  • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
  • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
  • You may send email to pubrequest@fs.fed.us to request a hard copy of this publication. (Please specify exactly which publication you are requesting and your mailing address.)

XML: View XML

Citation:


Hse, Chung-Yun 1972. Influence of resin formulation variables on bond quality of southern pine plywood. Forest Products Journal, Vol. 22(9): 104-108

 


 [ Get Acrobat ]  Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility

USDA logo which links to the department's national site. Forest Service logo which links to the agency's national site.