Skip to page content
USDA Forest Service
  
Treesearch

Research & Development Treesearch

 
Treesearch Home
About Treesearch
Contact Us
Research & Development
Forest Products Lab
International Institute of Tropical Forestry
Northern
Pacific Northwest
Pacific Southwest
Rocky Mountain
Southern Research Station
Help
 

Science.gov - We Participate


USA.gov  Government Made Easy


Global Forest Information Service

US Forest Service
P.O. Box 96090
Washington, D.C.
20090-6090

(202) 205-8333

You are here: Home / Search / Publication Information
Bookmark and Share

Publication Information

View PDF (1.43 MB bytes)

Title: Effect of resin type on properties of steam-press-cured flakeboards

Author: Hse, Chung-Yun; Geimer, Robert L.; Hsu, W. Ernest; Tang, R.C.;

Date: 1995

Source: Forest Products Journal, Vol. 45(1): 57-62

Publication Series: Miscellaneous Publication

Description: Six potentially important wood adhesives for gluing southern pine and white oak flakeboards were evaluated for their performances in steam-injection pressing and conventional platen pressing. Of the six resins tested, polyisocyanate resin performed well in both steam injection and conventional platen pressings. Phenol-fonnaldehyde (PF) and melamine urea-fonnaldehyde (MUF) resins performed poorly in steam-injection pressing. However, adding a small amount of polyisocyanate improved performance considerably. Bending strengths were consistently higher with conventional platen pressing than with steam-injection pressing. The lower density face in steam-injection pressing would result in lower bending properties. In PF and MUF resin systems, steam-injection pressing resulted in low bond strength and high dimensional stability, whereas conventional platen pressing resulted in high bond strength and low dimensional stability. The pairing of low strength with high stability suggested that bonding strength could not be the cause of improvement in dimensional stability. Most probably, steam pressing reduced internal stresses and stabilized the flakes, which in turn resulted in an improvement in dimensional stability. The improvement in dimensional stability may also be related to less strength loss of the board in steam-injection pressing when exposed to high relative humidity treatment.

Publication Notes:

  • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
  • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
  • You may send email to pubrequest@fs.fed.us to request a hard copy of this publication. (Please specify exactly which publication you are requesting and your mailing address.)

XML: View XML

Citation:


Hse, Chung-Yun; Geimer, Robert L.; Hsu, W. Ernest; Tang, R.C. 1995. Effect of resin type on properties of steam-press-cured flakeboards. Forest Products Journal, Vol. 45(1): 57-62

 


 [ Get Acrobat ]  Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility

USDA logo which links to the department's national site. Forest Service logo which links to the agency's national site.