Skip to page content
USDA Forest Service
  
Treesearch

Research & Development Treesearch

 
Treesearch Home
About Treesearch
Contact Us
Research & Development
Forest Products Lab
International Institute of Tropical Forestry
Northern
Pacific Northwest
Pacific Southwest
Rocky Mountain
Southern Research Station
Help
 

Science.gov - We Participate


USA.gov  Government Made Easy


Global Forest Information Service

US Forest Service
P.O. Box 96090
Washington, D.C.
20090-6090

(202) 205-8333

You are here: Home / Search / Publication Information
Bookmark and Share

Publication Information

View PDF (969 KB bytes)

Title: Geometric model for softwood transverse thermal conductivity. Part I

Author: Gu, Hong-mei; Zink-Sharp, Audrey;

Date: 2005

Source: Wood and fiber science. Vol. 37, no. 4 (2005): pages 699-711

Publication Series: Miscellaneous Publication

Description: Thermal conductivity is a very important parameter in determining heat transfer rate and is required for developing of drying models and in industrial operations such as adhesive cure rate. Geometric models for predicting softwood thermal conductivity in the radial and tangential directions were generated in this study based on obervation and measurements of wood structure. Modeling effective thermal conductivity in the radial and tangential directions is helpful in understanding the heat transfer mechanism in the two directions and predicting the values for a wide range of moisture contents (MC) when practical experiments for obtaining those values are unrealistic. Theoretical estimations indicate that radial thermal conductivity of softwood species is greather than tangenial thermal conductivity when the MC is below the fiber saturation point (FSP) due to structure differences in the two directions. A linear relationship was found between MC and radial thermal conductivity in the range of 0%-30%. Both radial and tangential thermal conductivity increases with an increase in latewood percentage. When MC is above FSP, tangential and radial thermal conductivity inceases dramatically and nolinearly with moisture content. However, no significant difference was found between radial and tangential thermal conductivity above the FSP. Geometric differences in the two directions had little effect on the model-estimated thermal conductivity when free water occupoed a portion of the cell lumen.

Keywords: Transverse thermal conductivity, heat transfer, geometric thermal conductivity model

Publication Notes:

  • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
  • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.

XML: View XML

Citation:


Gu, Hong-mei; Zink-Sharp, Audrey 2005. Geometric model for softwood transverse thermal conductivity. Part I. Wood and fiber science. Vol. 37, no. 4 (2005): pages 699-711

 


 [ Get Acrobat ]  Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility

USDA logo which links to the department's national site. Forest Service logo which links to the agency's national site.