Skip to page content
USDA Forest Service
  
Treesearch

Research & Development Treesearch

 
Treesearch Home
About Treesearch
Contact Us
Research & Development
Forest Products Lab
International Institute of Tropical Forestry
Northern
Pacific Northwest
Pacific Southwest
Rocky Mountain
Southern Research Station
Help
 

Science.gov - We Participate


USA.gov  Government Made Easy


Global Forest Information Service

US Forest Service
P.O. Box 96090
Washington, D.C.
20090-6090

(202) 205-8333

You are here: Home / Search / Publication Information
Bookmark and Share

Publication Information

View PDF (495 KB bytes)

Title: Racking strength of walls : let-in corner bracing, sheet materials, and effect of loading rate

Author: Tuomi, Roger L.; Gromala, David S.;

Date: 1977

Source: Res. Pap. FPL-RP-301. Madison, WI : U.S. Department of Agriculture, Forest Service, Forest Products Laboratory. 20 pages

Publication Series: Research Paper (RP)

Description: Determination of the racking strength of wails, which is a measure of a building system’s ability to resist wind loads, has generally been limited to performance testing. Although a standard test method exists, deviations have often been made in speed of testing and panel configuration. The purpose of this study was to determine the relative effect of some of these deviations on test results. In addition, the racking strength of wails with let-in corner braces, which forms the basis for acceptance criteria, was evaluated. Strength of wails with let-in corner braces, but without horizontal board sheathing, averaged less than 2/3 of the 5,200 pound value specified by FHA. Walls sheathed with fiberboard correlated well with theoretical strengths calculated using a recently developed equation. A tenfold change in rate of loading for small scale racking and lateral nail tests changed the strength 8 to 9 percent. Similar results would be expected for full size tests. The standard and modified test procedures used will be helpful in assessing the present test procedure and the feasibility of augmenting it with small-scale racking and lateral nail resistance tests. The evaluations conducted for this study are not to be interpreted as qualification tests for any of the materials involved.

Keywords: Strength, walls, buildings, fiberboards, shear, nails, wind loads, performance tests, test methods, sheathing, rate of loading, lateral resistance small scale racking, ASTM-E-72

Publication Notes:

  • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
  • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.

XML: View XML

Citation:


Tuomi, Roger L.; Gromala, David S. 1977. Racking strength of walls : let-in corner bracing, sheet materials, and effect of loading rate. Res. Pap. FPL-RP-301. Madison, WI : U.S. Department of Agriculture, Forest Service, Forest Products Laboratory. 20 pages

 


 [ Get Acrobat ]  Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility

USDA logo which links to the department's national site. Forest Service logo which links to the agency's national site.