Skip to page content
USDA Forest Service
  
Treesearch

Research & Development Treesearch

 
Treesearch Home
About Treesearch
Contact Us
Research & Development
Forest Products Lab
International Institute of Tropical Forestry
Northern
Pacific Northwest
Pacific Southwest
Rocky Mountain
Southern Research Station
Help
 

Science.gov - We Participate


USA.gov  Government Made Easy


Global Forest Information Service

US Forest Service
P.O. Box 96090
Washington, D.C.
20090-6090

(202) 205-8333

You are here: Home / Search / Publication Information
Bookmark and Share

Publication Information

View PDF (521 KB bytes)

Title: Effect of growth ring orientation and placement of earlywood and latewood on MOE and MOR of very-small clear Douglas-fir beams.

Author: Grotta, Amy T.; Leichti, Robert J.; Gartner, Barbara L.; Johnson, G.R.;

Date: 2005

Source: Wood and Fiber Science. 37(2): 207-212

Publication Series: Scientific Journal (JRNL)

Description: ASTM standard sizes for bending tests (either 50 x 50 mm or 25 x 25 mm in cross-section) are not always suitable for research purposes that characterize smaller sections of wood. Moreover, the ASTM standards specify loading the sample on the longitudinal-tangential surface. If specimens are small enough, then the effects of both growth-ring orientation and whether earlywood or latewood is on the upper and lower surfaces could affect values of modulus of elasticity (MOE) and modulus of rupture (MOR). The objectives of this study were to assess the effects of growth-ring orientation and latewood/earlywood location on bending properties of Douglas-fir specimens (10 x 10 x 150 mm). MOE did not differ with ring orientation, and MOR was about 5% higher when specimens were loaded on the radial rather than the tangential surface (MOE-LR vs. MOE-LR, respectively). The choice of growth-ring orientation did not affect the relative ranking of trees with respect to MOR or MOE. As expected, the variation of MOR and MOE was lower if the loads were applied to the longitudinal-radial surface than the longitudinal-tangential surface. Thus, rather than following the ASTM standard, within-tree variation measured on very small bending specimens can be minimized if loads are applied to the longitudinal-radial surface. When specimens were loaded on the longitudinal-tangential surfaces, there was an effect on both MOE-LR and MOR-LR of whether the top and/or bottom surfaces were earlywood or latewood. The wood type had a large effect on both MOE-LR and MOR-LR when it was the compression surface rather than the tension surface. This result suggests that variance in MOE and MOR measurements in very small specimens can be reduced by tracking whether the top and bottom surfaces are earlywood or latewood.

Keywords: size effect, growth-ring orientation, MOE, MOR, douglas-fir, bending, orthotropic material, small bending specimans

Publication Notes:

  • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
  • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.

XML: View XML

Citation:


Grotta, Amy T.; Leichti, Robert J.; Gartner, Barbara L.; Johnson, G.R. 2005. Effect of growth ring orientation and placement of earlywood and latewood on MOE and MOR of very-small clear Douglas-fir beams. Wood and Fiber Science. 37(2): 207-212

 


 [ Get Acrobat ]  Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility

USDA logo which links to the department's national site. Forest Service logo which links to the agency's national site.