Skip to page content
USDA Forest Service
  
Treesearch

Research & Development Treesearch

 
Treesearch Home
About Treesearch
Contact Us
Research & Development
Forest Products Lab
International Institute of Tropical Forestry
Northern
Pacific Northwest
Pacific Southwest
Rocky Mountain
Southern Research Station
Help
 

Science.gov - We Participate


USA.gov  Government Made Easy


Global Forest Information Service

US Forest Service
P.O. Box 96090
Washington, D.C.
20090-6090

(202) 205-8333

You are here: Home / Search / Publication Information
Bookmark and Share

Publication Information

View PDF (3.1 MB bytes)

Title: Status and trends : profile of structural panels in the United States and Canada

Author: Spelter, Henry; McKeever, David; Alderman, Matthew;

Date: 2006

Source: Research Note FPL-RP-636. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory. 41 pages

Publication Series: Research Paper (RP)

Description: This paper provides an overview of the North American (United States and Canada) structural panel industry, which consists of softwood plywood and oriented strandboard (OSB). The paper describes the evolution of overall capacities, effective capacity utilization, and manufacturing costs. As part of that, it describes changes in industry operating parameters such as wood use and yield, employee productivity, adhesives usage, and energy consumption. The major end-use markets for these commodities and market share trends are described as they evolved over time. Trends in foreign trade are also covered. Softwood plywood capacity peaked in 1989 at around 24 million m3 (27 billion ft2) and has since dropped to 16 million m3 (18 billion ft2). By contrast, OSB capacity has grown almost continuously and reached 23 million m3 (26 billion ft2) in 2006, on its way to about 26 million (29 billion ft2) by 2008. Productivity as measured by output capacity per employee is about four times higher in an OSB plant than in a plywood mill. Since its inception, OSB product recovery (yield) has also improved by about 15%. These are two major reasons why OSB manufacturing costs are about 25% lower than those for plywood. Given OSB’s higher profitability, most of the investment in the sector has been directed into that branch. The cyclical nature of structural panel demand combined with the tug and pull between plywood and OSB capacities have led to considerable cyclical volatility in prices and profits. Over the past 20 years, OSB has largely taken over the sheathing portion of the market for structural panels. Overall, the construction of new buildings and their upkeep and improvement are the largest market for structural panels in the United States. In 2003, about 23.3 million m3 (26.3 billion ft2) of structural panels were used for sheathing and exterior siding in these markets. The use of plywood for sheathing in walls is now rare, somewhat higher in roofs, and highest in flooring. To adapt to the competition, plywood manufacturing has evolved toward more industrial uses and higher grades of panels where its appearance and properties give it an edge that offsets its higher costs. Based on analysis of existing market shares of other materials, it is theoretically possible that structural panel consumption could be increased by about 40% over current levels. This would have represented an additional 9.5 million m3 (10.7 billion ft2) of structural panel consumption in 2003. Imports are an increasing part of supply, with Brazil, Chile, and Canada supplying growing amounts of plywood while Brazil and Europe augment major import flows of OSB from Canada.

Keywords: Structural panel industry capacity, oriented strandboard, plywood, employment, concentration ratios, resin use, wood use, historical evolution, end-use demand, panels, plywood industry

Publication Notes:

  • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
  • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.

XML: View XML

Citation:


Spelter, Henry; McKeever, David; Alderman, Matthew 2006. Status and trends : profile of structural panels in the United States and Canada. Research Note FPL-RP-636. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory. 41 pages

 


 [ Get Acrobat ]  Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility

USDA logo which links to the department's national site. Forest Service logo which links to the agency's national site.