Skip to page content
USDA Forest Service
  
Treesearch

Research & Development Treesearch

 
Treesearch Home
About Treesearch
Contact Us
Research & Development
Forest Products Lab
International Institute of Tropical Forestry
Northern
Pacific Northwest
Pacific Southwest
Rocky Mountain
Southern Research Station
Help
 

Science.gov - We Participate


USA.gov  Government Made Easy


Global Forest Information Service

US Forest Service
P.O. Box 96090
Washington, D.C.
20090-6090

(202) 205-8333

You are here: Home / Search / Publication Information
Bookmark and Share

Publication Information

View PDF (152 KB bytes)

Title: Processing woody debris biomass for co-milling with pulverized coal

Author: Mitchell, Dana; Rummer, Bob;

Date: 2007

Source: In: ASABE 2007 Annual International MEeting, Minneapolis, Minnesota. 17-20 June 2007. 6 p.

Publication Series: Miscellaneous Publication

Description:

The USDA, Forest Service, Forest Products Lab funds several grants each year for the purpose of studying woody biomass utilization. One selected project proposed removing small diameter stems and unmerchantable woody material from National Forest lands and delivering it to a coal-fired power plant in Alabama for energy conversion. The Alabama Power Company will test the utilization of the woody biomass in one of their energy production facilities to determine the feasibility of this new market. The Talladega National Forest and the Gadsden Steam Plant are serving as the demonstration areas for the project.

One of the first steps in this project was to select in-woods processing equipment. The biomass fuel to be created in this project must meet unique criteria that differentiate fuel chips created for the power plant from those of typical fuel chips. The wood fuel was to be created from whole-tree chips and co-milled with coal. Biomass specifications were primarily limited by size so that the chips would pass through the current fuel handling system in the plant. In addition, the fuel chips must have edges that are fairly clean and sharp to prevent plugging fuel pathways in the plant. One of the initial steps in the project was to examine output from a variety of in-woods processing equipment to determine which could meet the specifications with one-pass processing. After further review, it was determined that a cutting action, as opposed to a shearing action, was needed to meet the raw material handling requirements within the plant. Output from a specially equipped horizontal grinder was the final equipment choice.

Keywords: biomass, forest engineering, harvesting, logging, chipper, grinder

Publication Notes:

  • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
  • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
  • You may send email to pubrequest@fs.fed.us to request a hard copy of this publication. (Please specify exactly which publication you are requesting and your mailing address.)

XML: View XML

Citation:


Mitchell, Dana; Rummer, Bob 2007. Processing woody debris biomass for co-milling with pulverized coal. In: ASABE 2007 Annual International MEeting, Minneapolis, Minnesota. 17-20 June 2007. 6 p.

 


 [ Get Acrobat ]  Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility

USDA logo which links to the department's national site. Forest Service logo which links to the agency's national site.