Skip to page content
USDA Forest Service
  
Treesearch

Research & Development Treesearch

 
Treesearch Home
About Treesearch
Contact Us
Research & Development
Forest Products Lab
International Institute of Tropical Forestry
Northern
Pacific Northwest
Pacific Southwest
Rocky Mountain
Southern Research Station
Help
 

Science.gov - We Participate


USA.gov  Government Made Easy


Global Forest Information Service

US Forest Service
P.O. Box 96090
Washington, D.C.
20090-6090

(202) 205-8333

You are here: Home / Search / Publication Information
Bookmark and Share

Publication Information

View PDF (165 KB bytes)

Title: Effects of raw materials on the properties of wood fiber-polyethylene composites--part 3: effect of a compatibilizer and wood adhesive on the interfacial adhesion of wood/plastic composites

Author: Hwang, Chin-yin; Hse, Chung-yun; Shupe, Todd F.;

Date: 2008

Source: Forest Products Journal, Vol. 59(5): 66-72

Publication Series: Miscellaneous Publication

Description: The objective of this study was to examine the effect of maleated polypropylene compatabilizer on the interfacial properties of wood and polyolefins. Birch wood dowels containing an adhesive applied on the surface were embedded in molten plastic matrices using specially designed jigs. The three plastics investigated included low density polyethylene (LFPE), linear low density polyethylene (LLDPE), and polypropylene (PP). The four adhesives used were urea formaldehyde (UF), phenol formaldehyde (PF), isocyanate (ISO), and a control group that did not contain any adhesive. A low molecular weight emulsion type MAPP, Epolene (E-43) was used at concentrations of 0 (control), 10 percent, 20 percent, 30 percent, and 40 percent. Modified single-fiber pull-out tests were performed to investigate the interrelationships between a four-component system of woodadhesive-compatibilizer-plastic, simulating the interphase of a wood-thermoplastic composite. The interfacial shear strength as measured by the modified single-fiber pull-out test indicated that the overall average interfacial shear strength was highest in PP and lowest in LDPE. ISO-bonded LDPE without E-43 treatment showed the highest interfacial shear strength among all other LDPE composites. The E-43-treated wood surfaces without adhesive displayed overall superior performance than all adhesive bonded LLDPE. Addition of E-43 greatly enhanced the interfacial shear strength for all plastic types, except for ISO-bonded LDPE and LLDPE. The effect of E-43 was most pronounced in PP and less in LDPE and LLDPE. Adhesive failure prevailed in LDPE and LLDPE composites while PP showed predominately cohesive failures in the wood dowel or in the plastic matrix.

Publication Notes:

  • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
  • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
  • You may send email to pubrequest@fs.fed.us to request a hard copy of this publication. (Please specify exactly which publication you are requesting and your mailing address.)

XML: View XML

Citation:


Hwang, Chin-yin; Hse, Chung-yun; Shupe, Todd F. 2008. Effects of raw materials on the properties of wood fiber-polyethylene composites--part 3: effect of a compatibilizer and wood adhesive on the interfacial adhesion of wood/plastic composites. Forest Products Journal, Vol. 59(5): 66-72

 


 [ Get Acrobat ]  Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility

USDA logo which links to the department's national site. Forest Service logo which links to the agency's national site.