You are here: Home
/ Publication Information
Title: Felling small trees with a drive-to-tree feller-buncher
Author: Mitchell, Dana;
Source: Technical release 08-R-16. Rockville, MD: Forest Resources Association, Inc. 2 p.
Publication Series: Miscellaneous Publication
Description: Conventional forestry equipment is often used to harvest small-diameter trees. The typical ground-based logging operation is highly mechanized, with the most common using feller-bunchers, grapple skidders, and a chipper or grinder. But these machines may not be economical when used in pre-commercial or unmerchantable thinning operations in which the number of trees to be removed per acre is high but volume per tree is low. Published studies commonly find that feller-buncher productivity (tons/productive machine hour) is directly proportional to tree diameter. As tree diameters increase, the tons produced per hour increase, resulting in a lower cost per unit of wood produced.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
- You may send email to firstname.lastname@example.org to request a hard copy of this publication. (Please specify exactly
which publication you are requesting and your mailing address.)
XML: View XML
Mitchell, Dana 2008. Felling small trees with a drive-to-tree feller-buncher. Technical release 08-R-16. Rockville, MD: Forest Resources Association, Inc. 2 p.
Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility