Skip to page content
USDA Forest Service
  
Treesearch

Research & Development Treesearch

 
Treesearch Home
About Treesearch
Contact Us
Research & Development
Forest Products Lab
International Institute of Tropical Forestry
Northern
Pacific Northwest
Pacific Southwest
Rocky Mountain
Southern Research Station
Help
 

Science.gov - We Participate


USA.gov  Government Made Easy


Global Forest Information Service

US Forest Service
P.O. Box 96090
Washington, D.C.
20090-6090

(202) 205-8333

You are here: Home / Search / Publication Information
Bookmark and Share

Publication Information

View PDF (319 KB bytes)

Title: Wood-plastic composites using thermomechanical pulp made from oxalic acid-pretreated red pine chips

Author: Winandy, J.E.; Stark, N.M.; Horn, E.;

Date: 2008

Source: Global WPC and Natural Fibre Composites Congress and Exhibition : June 18-19, 2008, Kassel, Institut fur Werkstofftechnik, Kunststoff-und Recyclingtechnik : scientific presentations. Szczecin, Poland : PPH ZAPOL Dmochowski, Sobczyk Spolka Jauna, 2008: Pages 1-7

Publication Series: Miscellaneous Publication

Description: The characteristics and properties of wood fiber is one of many factors of critical importance to the performance of wood-plastic composites. In commercial thermo-mechanical pulping (TMP) of wood chips to produce fibers, high temperatures (>100°C) are used to separate the fibers during TMP refining. These mechanical pressures and temperatures are usually modulated to achieve the desired fiber characteristics and properties. However, relatively high total electric energy is required to produce these TMP pulps. Recently, an oxalic-acid pretreatment of wood chips prior to TMP refining has been developed. Previous, experiments have found that the energy required in refining after such pretreatment can be dramatically reduced. In addition, other work with medium-density fiberboard made using TMP fiber from oxalic acid-pretreated chips was shown to have enhanced moisture resistance when compared to fiberboard made with non-treated fiber. In the experiments reported in this paper, wood chips were first pre-treated using either oxalic acid- or dialkyl ester oxalic acid-derivatives, then refined into fiber using traditional TMP refining processes. These variously treated fiber groupings were then compounded with high-density polyethylene and injected molded into flexural test specimens (ASTM D790). Wood-plastic composites made using fibers from these oxalic acid- and diethyloxalate-pretreatments were shown to produce wood-plastic composites with similar mechanical performance to that of composites made using untreated control fibers. With further work, oxalic acid- and diethyloxalate-pretreatments may result in a modified wood fiber that has potential to enhance physical properties such as dimensional stability, has virtually no effect on mechanical performance, but greatly diminishes the energy required to refine pine chips into fiber.

Keywords: Composite materials, testing, energy consumption, mechanical properties, injection molding of plastics, wood-plastic composites, oxalic acid, wood-pulp, pulping, polyethylene, diethyl oxalate, wood fibers, red pine, wood-plastic materials, thermomechanical pulping, chips, pretreatment

Publication Notes:

  • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
  • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.

XML: View XML

Citation:


Winandy, J.E.; Stark, N.M.; Horn, E. 2008. Wood-plastic composites using thermomechanical pulp made from oxalic acid-pretreated red pine chips. Global WPC and Natural Fibre Composites Congress and Exhibition : June 18-19, 2008, Kassel, Institut fur Werkstofftechnik, Kunststoff-und Recyclingtechnik : scientific presentations. Szczecin, Poland : PPH ZAPOL Dmochowski, Sobczyk Spolka Jauna, 2008: Pages 1-7

 


 [ Get Acrobat ]  Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility

USDA logo which links to the department's national site. Forest Service logo which links to the agency's national site.