Skip to page content
USDA Forest Service
  
Treesearch

Research & Development Treesearch

 
Treesearch Home
About Treesearch
Contact Us
Research & Development
Forest Products Lab
International Institute of Tropical Forestry
Northern
Pacific Northwest
Pacific Southwest
Rocky Mountain
Southern Research Station
Help
 

Science.gov - We Participate


USA.gov  Government Made Easy


Global Forest Information Service

US Forest Service
P.O. Box 96090
Washington, D.C.
20090-6090

(202) 205-8333

You are here: Home / Search / Publication Information
Bookmark and Share

Publication Information

View PDF (268 KB bytes)

Title: Melamine-modified urea formaldehyde resin for bonding particleboards

Author: Hse, Chung-Yun; Fu, Feng; Pan, Hui;

Date: 2008

Source: Forest Products Journal Vol. 58, No. 4

Publication Series: Miscellaneous Publication

Description: For the development of a cost-effective melamine-modified urea formaldehyde resin (MUF), the study evaluated the effects of reaction pH and melamine content on resin properties and bond performance of the MUF resin adhesive systems. Eight resins, each with three replicates, were prepared in a factorial experiment that included two formulation variables: two reaction pHs (i.e., 4.5 and 8.0) and four molar ratios of formaldehyde to urea to melamine (i.e., 3/2.2/0.3, 3/2.2/0.2, 3/2.2/0.1, and 3/2.2/0.05). Variables in particleboard preparation were two hot-press cured times (2 and 4 min). Thus, with two panel replications, a total of 96 panels were fabricated. Melamine content significantly affected resin properties and glue bond quality: gel time decreased, solid content increased, internal bond strength increased, thickness swell and water absorption decreased, and formaldehyde emission decreased as melamine content increased. In general, the resins catalyzed under acidic conditions (pH 4.5) resulted in faster gel times, higher internal bond strengths, lower formaldehyde emissions, and lower thickness swell and water adsorption than those catalyzed under alkaline conditions (pH 8.0). Significant correlation between gel time with both internal bond strength and formaldehyde emission suggest that resins with fast curing speeds provided favorable conditions for attaining a higher degree of resin cure, and in turn led to better bond strength and lower formaldehyde emission.

Publication Notes:

  • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
  • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
  • You may send email to pubrequest@fs.fed.us to request a hard copy of this publication. (Please specify exactly which publication you are requesting and your mailing address.)

XML: View XML

Citation:


Hse, Chung-Yun; Fu, Feng; Pan, Hui 2008. Melamine-modified urea formaldehyde resin for bonding particleboards. Forest Products Journal Vol. 58, No. 4

 


 [ Get Acrobat ]  Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility

USDA logo which links to the department's national site. Forest Service logo which links to the agency's national site.