Skip to page content
USDA Forest Service

Research & Development Treesearch

Treesearch Home
About Treesearch
Contact Us
Research & Development
Forest Products Lab
International Institute of Tropical Forestry
Pacific Northwest
Pacific Southwest
Rocky Mountain
Southern Research Station
Help - We Participate  Government Made Easy

Global Forest Information Service

US Forest Service
P.O. Box 96090
Washington, D.C.

(202) 205-8333

You are here: Home / Search / Publication Information
Bookmark and Share

Publication Information

View PDF (165 K bytes)

Title: Infiltration, erosion, and vegetation recovery following road obliteration

Author: Foltz, R. B.; Rhee, H.; Yanosek, K. A.;

Date: 2007

Source: Transactions of ASABE. 50(6): 1937-1943.

Publication Series: Miscellaneous Publication

Description: Forest roads are obliterated to lower the risks of surface erosion and mass failures. One purpose of the road obliteration is to return the compacted forest roads to productive pre-road conditions, i.e., a forest floor with high infiltration capacity, low interrill erodibility, and high vegetation ground cover. It is important to know how these characteristics recover following road obliteration. Infiltration capacity, interrill erodibility, and vegetation ground cover are essential parameters for modeling erosion from obliterated roads for erosion prediction models such as the Water Erosion Prediction Project (WEPP). We chose three sites located on the Payette National Forest, Idaho. Rainfall simulations were conducted on 1 x 1 m plots with three replications in two consecutive years. Three 30 min storm events with an intensity of 89 mm h-1 were applied to each plot. Photos were taken to determine vegetation ground cover. Infiltration capacity and interrill erodibility in this study were determined as 9.0 mm h-1 for saturated hydraulic conductivity and 3.2 x 106 kg·s m-4 for interrill erodibility. This study postulated a history of saturated hydraulic conductivity on a forest road from prior to road building to years after obliteration. The low elevation (1400 m) site had vegetation ground cover of 27% after three years following road obliteration, while the other high elevation (1800 m and 2200 m) sites had 8% after four years. We conclude that four years was not sufficient time for obliterated roads to return to the pre-road (forest floor) conditions, especially for infiltration capacity.

Keywords: erosion, forest roads, infiltration, interrill erodibility, obliteration, rainfall simulation, saturated hydraulic conductivity, vegetation recovery, WEPP

Publication Notes:

  • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
  • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
  • You may send email to to request a hard copy of this publication. (Please specify exactly which publication you are requesting and your mailing address.)



Foltz, R. B.; Rhee, H.; Yanosek, K. A. 2007. Infiltration, erosion, and vegetation recovery following road obliteration. Transactions of ASABE. 50(6): 1937-1943.


 [ Get Acrobat ]  Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility

USDA logo which links to the department's national site. Forest Service logo which links to the agency's national site.