Skip to page content
USDA Forest Service
  
Treesearch

Research & Development Treesearch

 
Treesearch Home
About Treesearch
Contact Us
Research & Development
Forest Products Lab
International Institute of Tropical Forestry
Northern
Pacific Northwest
Pacific Southwest
Rocky Mountain
Southern Research Station
Help
 

Science.gov - We Participate


USA.gov  Government Made Easy


Global Forest Information Service

US Forest Service
P.O. Box 96090
Washington, D.C.
20090-6090

(202) 205-8333

You are here: Home / Search / Publication Information
Bookmark and Share

Publication Information

View PDF (275 KB bytes)

Title: Why do some wood-adhesive bonds respond poorly to accelerated moisture-resistant tests?

Author: Frihart, Charles R.; Wescott, James M.;

Date: 2008

Source: 9th Pacific Rim Bio-Based Composites Symposium : Innovation and Challenges in Bio-based Composites--How Far to the New Frontier? : 5th-8th November 2008, Rotorua, New Zealand. [S.l. : s.n.], 2008: pages 51-58.

Publication Series: Miscellaneous Publication

Description: The most challenging part of developing acceptable adhesives for wood bonding often is to create a bond that will withstand exposure to wet conditions or wet/dry cycles. Products that pass these tests have been developed empirically, but the aspects that make it difficult for adhesives to pass these tests and systematically ways to develop more durable adhesive bonds have not been researched. The first aspect is that the swelling strain of wood can impart sufficient force to contribute to the bond fracture if interfacial strain between the adhesive and wood is not dissipated through the interphase regions. The second aspect is that adhesives for wood bonding fall into two groups (in-situ polymerized and pre-polymerized) based upon their chemical-structure-property relationships and their abilities to interact with wood cell walls. The in-situ polymerized adhesives are typically rigid monomers/oligomers that form the polymer backbone and numerous crosslinks after application to wood. Some of these adhesives can enter into cell walls and stabilize the wood interphase region to decrease interfacial strain. Pre-polymerized adhesives usually have only a low degree of reaction after application as well as flexibility in the backbone. Because these polymeric adhesives are generally too large to stabilize wood cell walls, they need to dissipate interfacial strain between the wood and adhesive through the adhesive interphase region. If adhesives do not form interphases that distribute strain, they are more likely to fail as wood swells upon absorbing moisture.

Keywords: Plant cell walls, crosslinking, polymerization, elasticity, mechanical properties, strains, stresses, wood moisture, adhesion, adhesives, moisture content, glue, glues and gluing, bond strength, flexibility, wood bonding, bonding, failure, durability, swelling, durability

Publication Notes:

  • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
  • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.

XML: View XML

Citation:


Frihart, Charles R.; Wescott, James M. 2008. Why do some wood-adhesive bonds respond poorly to accelerated moisture-resistant tests? In: Proceedings for the 9th Pacific Rim bio-based composites symposium. 2008 November 5-8. Roturua, New Zealand. 51-58.

 


 [ Get Acrobat ]  Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility

USDA logo which links to the department's national site. Forest Service logo which links to the agency's national site.