Skip to page content
USDA Forest Service

Research & Development Treesearch

Treesearch Home
About Treesearch
Contact Us
Research & Development
Forest Products Lab
International Institute of Tropical Forestry
Pacific Northwest
Pacific Southwest
Rocky Mountain
Southern Research Station
Help - We Participate  Government Made Easy

Global Forest Information Service

US Forest Service
P.O. Box 96090
Washington, D.C.

(202) 205-8333

You are here: Home / Search / Publication Information
Bookmark and Share

Publication Information

View PDF (1.8 MB)

Title: Comparing timber and lumber from plantation and natural stands of ponderosa pine

Author: Lowell, Eini C.; Todoroki, Christine L.; Thomas, Ed.;

Date: 2009

Source: Western Journal of Applied Forestry. 24(3): 137-143

Publication Series: Scientific Journal (JRNL)

Description: Data derived from empirical studies, coupled with modeling and simulation techniques, were used to compare tree and product quality from two stands of small-diameter ponderosa pine trees growing in northern California: one plantation, the other natural. The plantation had no management following establishment, and the natural stand had no active management. Fifty trees of similar diameter classes were selected from each site, measured, bucked into logs, and sawn into boards, and the boards were scanned for defects. Trees from the plantation stand demonstrated less variability in tree height, crown length, and age structure. The plantation trees were on average 4 years younger than their natural cohorts, yet for all but the smallest diameter there were no significant differences between mean tree height or crown length. Predicted merchantable volumes differed significantly for the longest diameter class. Merchantable volume was estimated to be 5% greater for the plantation trees than for the natural stand trees. More logs were bucked from the plantation stands, resulting in greater lumber production and greater value overall. Built logs from the plantation stand had an average of 9 whorls per log, whereas natural butt logs averaged 10 whorls per log. The most numerous defects, outnumbering knots and wane, were needle traces. These occupied some 31 % of natural board surface area, in comparison with 19% for plantation boards. Given the shorter time frame required to grow plantation trees, the greater merchantable volumes, and more consumer-acceptable defects, plantation stands, even with a minimal level of management, offer greater product potential than natural stands.

Keywords: ponderosa pine, plantation, AUTOSAW, lumber quality

Publication Notes:

  • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
  • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.



Lowell, Eini C.; Todoroki, Christine L.; Thomas, Ed. 2009. Comparing timber and lumber from plantation and natural stands of ponderosa pine. Western Journal of Applied Forestry. 24(3): 137-143.


 [ Get Acrobat ]  Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility

USDA logo which links to the department's national site. Forest Service logo which links to the agency's national site.