You are here: Home
/ Publication Information
Title: Manual felling time and productivity in southern forests
Author: Lortz, D.; Kluender, R.; McCoy, W; [and others],;
Source: Forest Products Journal. 47(10): 59-63. (Editor’s note: B. Stokes and J. Klepac are the SRS co-authors for this publication.)
Publication Series: Miscellaneous Publication
Description: Sixteen stands were harvested by either clearcut, shelterwood, group selection, or single-tree selection methods. Three of the stands had uneven-aged structure. The other 13 were typical, mature, even-aged stands. Harvest intensity (proportion of basal area removed) ranged from 0.27 to 1.00. Harvested sites were similar in slope, average diameter at breast height (d.b.h.), and pre-harvest diameter distributions. Logging contractors used 1 to 3 sawyers with production chain saws on all 16 tracts. There was no difference in production rate between sawyers on the same stand. Factors affecting total felling time (in decreasing order of importance) were d.b.h. of harvested stems, inter-tree distance, and harvest intensity. Total felling time (including walk, acquire, fell, and limb-top times) was inversely related to harvesting intensity and directly related to stem d.b.h. and inter-tree distance. Felling productivity was found to be highest under high intensity harvests of large trees and lowest under low intensity harvests of small trees. Productivity was more sensitive to stem diameter than harvest intensity.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
- You may send email to email@example.com to request a hard copy of this publication. (Please specify exactly
which publication you are requesting and your mailing address.)
XML: View XML
Lortz, D.; Kluender, R.; McCoy, W; [and others] 1997. Manual felling time and productivity in southern forests. Forest Products Journal. 47(10): 59-63. (Editor’s note: B. Stokes and J. Klepac are the SRS co-authors for this publication.)
Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility