Skip to page content
USDA Forest Service
  
Treesearch

Research & Development Treesearch

 
Treesearch Home
About Treesearch
Contact Us
Research & Development
Forest Products Lab
International Institute of Tropical Forestry
Northern
Pacific Northwest
Pacific Southwest
Rocky Mountain
Southern Research Station
Help
 

Science.gov - We Participate


USA.gov  Government Made Easy


Global Forest Information Service

US Forest Service
P.O. Box 96090
Washington, D.C.
20090-6090

(202) 205-8333

You are here: Home / Search / Publication Information
Bookmark and Share

Publication Information

View PDF (1.0 MB)

Title: Magnetic resonance imaging used for the evaluation of water presence in wood plastic composite boards exposed to exterior conditions

Author: Gnatowski, Marek; Ibach, Rebecca; Leung, Mathew; Sun, Grace;

Date: 2014

Source: Wood Material Science and Engineering, 2014; 18p.

Publication Series: Scientific Journal (JRNL)

Description: Two wood plastic composite (WPC) boards, one experimental and one commercial, were exposed to exterior conditions and evaluated non-destructively using a clinical magnetic resonance imaging (MRI) unit for moisture content (MC) and distribution. The experimental board was exposed in Vancouver, British Columbia, for more than 8 years, and the commercial board was exposed near Hilo, Hawaii, for 2 years. Both boards were characterized in terms of wood content, density, water uptake properties and voids content. The experimental board was additionally destructively analysed for water absorption of the WPC and MC calculated based on the wood content for verification of MRI results. MRI detected the presence of free water and its distribution in both of the WPC boards. Fibre saturation in the experimental board was found to be about 22–24%, in comparison to 25–30% present in most wood species. There was good correlation between the detection of free water by MRI and by destructive testing. Magnetic resonance images showed various major points of water entry in the WPC boards such as the support area, the cut ends, the dripping edge and the sides of the boards. For the experimental board, significant water entry also occurred at the upper exposed surface.

Keywords: Computed tomography, exterior exposure, magnetic resonance imaging, moisture content, water absorption, wood plastic composite, void analysis

Publication Notes:

  • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
  • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.

XML: View XML

Citation:


Gnatowski, Marek; Ibach, Rebecca; Leung, Mathew; Sun, Grace 2014. Magnetic resonance imaging used for the evaluation of water presence in wood plastic composite boards exposed to exterior conditions. Wood Material Science and Engineering, 2014; 18p.

 


 [ Get Acrobat ]  Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility

USDA logo which links to the department's national site. Forest Service logo which links to the agency's national site.