You are here: Home
/ Publication Information
Title: Effect of wood grain and veneer side on loblolly pine veneer wettability
Author: Shupe, Todd E.; Hse, Chung Y.; Choong, Elvin T.; Groom, Leslie H.;
Source: Forest Products Journal. 48(6): 95-97.
Publication Series: Miscellaneous Publication
Description: Research was initiated to determine the effect of veneer side (tight or loose), and wood grain (earlywood or latewood) on the wettability of loblolly pine veneer. Contact angle measurements were performed with phenol-formaldehyde resin and distilled water. The resin and distilled water showed slightly higher contact angle mean values on the latewood portion for both the tight side and loose side. The distilled water showed lower contact angle mean values on the loose side compared to the corresponding resin values on the loose side. This difference is largely attributable to the differences in the surface tension of these two wetting materials, and the ability of the distilled water to more easily penetrate on the loose side of veneer.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
- You may send email to email@example.com to request a hard copy of this publication. (Please specify exactly
which publication you are requesting and your mailing address.)
XML: View XML
Shupe, Todd E.; Hse, Chung Y.; Choong, Elvin T.; Groom, Leslie H. 1998. Effect of wood grain and veneer side on loblolly pine veneer wettability. Forest Products Journal. 48(6): 95-97.
Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility