Skip to page content
USDA Forest Service
  
Treesearch

Research & Development Treesearch

 
Treesearch Home
About Treesearch
Contact Us
Research & Development
Forest Products Lab
International Institute of Tropical Forestry
Northern
Pacific Northwest
Pacific Southwest
Rocky Mountain
Southern Research Station
Help
 

Science.gov - We Participate


USA.gov  Government Made Easy


Global Forest Information Service

US Forest Service
P.O. Box 96090
Washington, D.C.
20090-6090

(202) 205-8333

You are here: Home / Search / Publication Information
Bookmark and Share

Publication Information

View PDF (307 KB)

Title: Non-destructive Analysis Reveals Effect of Installation Details on Plywood Siding Performance

Author: Hunt, Christopher G.; Schueneman, Gregory T.; Lacher, Steven; Wang, Xiping; Williams, R. Sam;

Date: 2015

Source: USDA Forest Service, Forest Products Laboratory, General Technical Report, FPL-GTR-239, 2015; pp. 314-320.

Publication Series: General Technical Report (GTR)

Description: This study evaluated the influence of a variety of construction techniques on the performance of plywood siding and the applied paint, using both ultrasound and conventional visual inspection techniques. The impact of bottom edge contact, flashing vs. caulking board ends, priming the bottom edge, location (Wisconsin vs. Mississippi) and a gap behind the siding to facilitate drainage were tested. Test fences were constructed to provide outdoor exposure of 2 replicates of each permutation using full factorial design. Yellow poplar (Liriodendron tulipifera), a decay prone wood species was used for the plywood to accelerate the results. After four years of outdoor exposure, mushrooms were observed on the surface of some boards and all were removed for lab evaluation. Extensive water staining was seen on the backs of the boards caused by water travelling upward from the bottom edge. Sound velocities were measured to determine the degree of decay. Herein we will present an analysis of the relative merits of ultrasound vs. visual inspection. We also analyze factors impacting performance, including the poor performance obtained when the bottom of a piece of wood is in contact with another surface, and the unusually poor performance of the gap behind siding. The study will conclude with recommendations for construction practices.

Keywords: International Nondestructive Testing and Evaluation of Wood Symposium, nondestructive testing, nondestructive evaluation, wood, wood products

Publication Notes:

  • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
  • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.

XML: View XML

Citation:


Hunt, Christopher G.; Schueneman, Gregory T.; Lacher, Steven; Wang, Xiping; Williams, R. Sam 2015. Non-destructive Analysis Reveals Effect of Installation Details on Plywood Siding Performance. USDA Forest Service, Forest Products Laboratory, General Technical Report, FPL-GTR-239, 2015; pp. 314-320.

 


 [ Get Acrobat ]  Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility

USDA logo which links to the department's national site. Forest Service logo which links to the agency's national site.