Skip to page content
USDA Forest Service

Research & Development Treesearch

Treesearch Home
About Treesearch
Contact Us
Research & Development
Forest Products Lab
International Institute of Tropical Forestry
Pacific Northwest
Pacific Southwest
Rocky Mountain
Southern Research Station
Help - We Participate  Government Made Easy

Global Forest Information Service

US Forest Service
P.O. Box 96090
Washington, D.C.

(202) 205-8333

You are here: Home / Search / Publication Information
Bookmark and Share

Publication Information

View PDF (3.0 MB bytes)

Title: Catalysis: A Potential Alternative to Kraft Pulping

Author: Rudie, Alan W.; Hart, Peter W.;

Date: 2014

Source: TAPPI PEERS, Tacoma, WA, September 14-17, 2014, Preprint 4-1. 2014

Publication Series: Scientific Journal (JRNL)

Description: A thorough analysis of the kraft pulping process makes it obvious why it has dominated for over a century as an industrial process with no replacement in sight. It uses low cost raw materials, collects and regenerates over 90% of the chemicals needed in the process, is indifferent to wood raw material and good at preserving the cellulose portion of the wood which is the part that provides strong fibers. Although an odiferous process, extremely capital intensive, and very poor at preserving hemicellulose yield, no alternatives have been able to replace it for process cost and product quality. There is a misconception that there have been no new pulping processes discovered since the discovery of kraft pulping. Besides the minor adjustments like antrhraquinone or polysulfide, chlorine, chlorite and peracetic acid holopulping were discovered and evaluated decades ago. Various solvent pulping methods were discovered and evaluated in the 1980’s and 1990’s and this litany continues with ionic solvents, deep eutectic solvents and most recently protic ionic liquids. Where all of these alternative processes fail is process cost. The chemicals are too expensive and too hard to recover to use for commercial production of wood pulp. The premise of this review is that the only way to achieve better performance and a lower cost than the existing kraft pulping process will be a process using a catalyst to control and direct the reactions. With a high enough reaction rate and a sufficiently high number of turnovers, even an expensive catalyst can still be low cost. This effort has reviewed the literature of existing pulping and delignification catalysts and proposes research areas of interest for more intensive experimental efforts.

Keywords: catalyst, pulping, review

Publication Notes:

  • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
  • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.



Rudie, Alan W.; Hart, Peter W. 2014. Catalysis: A Potential Alternative to Kraft Pulping. A Synthesis of the Literature. TAPPI PEERS, Tacoma, WA, September 14-17, 2014, Preprint 4-1. 37 p.


 [ Get Acrobat ]  Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility

USDA logo which links to the department's national site. Forest Service logo which links to the agency's national site.