Skip to page content
USDA Forest Service
  
Treesearch

Research & Development Treesearch

 
Treesearch Home
About Treesearch
Contact Us
Research & Development
Forest Products Lab
International Institute of Tropical Forestry
Northern
Pacific Northwest
Pacific Southwest
Rocky Mountain
Southern Research Station
Help
 

Science.gov - We Participate


USA.gov  Government Made Easy


Global Forest Information Service

US Forest Service
P.O. Box 96090
Washington, D.C.
20090-6090

(202) 205-8333

You are here: Home / Search / Publication Information
Bookmark and Share

Publication Information

View PDF (946.0 KB bytes)

Title: Comparison of Wood Composite Properties Using Cantilever-Beam Bending

Author: Zhang, Houjiang; Hunt, John F.; Zhou, Lujing;

Date: 2015

Source: BioResources

Publication Series: Scientific Journal (JRNL)

Description: Wood-based composite panels generally are first tested out-of-plane in the primarypanel directionfollowed by the cross panel direction, but rarely edgewise. While most applications use wood-based composites in the flat-wise orientation and only need the out-of-plane properties, there are construction configurations where edgewise properties are needed for improved design configurations. A square cantilever beam was used to determine the apparent stiffness (EI) and modulus of elasticity (E ) differences for 3 wood-based composite panel materials. Specimens were cut along the primary panel direction or machine direction (MD) and perpendicular to the primary direction or cross-machine direction (CD). The square specimens were first non-destructively tested oriented in the normal or out-of-plane position, then rotated 90 degrees to measure edgewise properties. The results for a 20 mm thick medium density fiberboard (MDF) showed that the MD properties were 56% higher than the CD properties. The other two composite materials, 12 mm thick particleboard (PB) and 12 mm thick MDF, were essentially the same in the MD or CD directions. For all the materials, the differences between the out-of-plane and the edgewise loading directions showed higher El and E between 17 to 61%, respectively. The largest difference was found in the PB composite material properties that were between 42 to 61% higher for the out-of-plane properties. For the 12 and 20 mm thick MDF material, in-plane propertieswere 27 to 33% and 17 to 23% higher, respectively. The cantilever bending method was able to quickly assess the difference using the same specimen.

Keywords: Wood-based composites, Cantilever-beam bending, Mechanical properties, MD and CD orientation, Out-of-plane properties, Edgewise properties, Stiffness, Modulus of elasticity

Publication Notes:

  • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
  • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.

XML: View XML

Citation:


Zhang, Houjiang; Hunt, John F.; Zhou, Lujing. 2015. Comparison of wood composite properties using cantilever-beam bending. BioResources. 10(2): 3070-3078.

 


 [ Get Acrobat ]  Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility

USDA logo which links to the department's national site. Forest Service logo which links to the agency's national site.