Skip to page content
USDA Forest Service
  
Treesearch

Research & Development Treesearch

 
Treesearch Home
About Treesearch
Contact Us
Research & Development
Forest Products Lab
International Institute of Tropical Forestry
Northern
Pacific Northwest
Pacific Southwest
Rocky Mountain
Southern Research Station
Help
 

Science.gov - We Participate


USA.gov  Government Made Easy


Global Forest Information Service

US Forest Service
P.O. Box 96090
Washington, D.C.
20090-6090

(202) 205-8333

You are here: Home / Search / Publication Information
Bookmark and Share

Publication Information

View PDF (2.0 MB bytes)

Title: Mechanical characterization of scalable cellulose nano-fiber based composites made using liquid composite molding process

Author: Barari, Bamdad; Ellingham, Thomas K.; Ghamhia, Issam I.; Pillai, Krishna M.; El-Hajjar, Rani; Turng, Lih-Sheng; Sabo, Ronald;

Date: 2016

Source: Composites Part B: Engineering

Publication Series: Scientific Journal (JRNL)

Description: Plant derived cellulose nano-fibers (CNF) are a material with remarkable mechanical properties compared to other natural fibers. However, efforts to produce nano-composites on a large scale using CNF have yet to be investigated. In this study, scalable CNF nano-composites were made from isotropically porous CNF preforms using a freeze drying process. An improvised Liquid Composite Molding (LCM) process was used to make the nano-composites using a high bio-content ‘green’ epoxy resin. Formation of the freeze dried CNF preforms' porous network highly affects the mechanical properties of the composite, therefore mechanical testing was performed to characterize the effects of pore structure on global mechanical properties. The level of cure was investigated by comparing DSC results and the effect of curing on the composites was studied by tensile and dynamic mechanical analysis tests. The efficacy of silylation on the CNF preforms was analyzed with Water Contact Angle (WCA) measurements where the treatment led to hydrophobicity and hence better wettability by the non-polar resin. The causes of the failure in the composites were investigated using SEM analysis of the fractured surfaces. In general, silylation improved the infusion of resin into CNF preforms and resulted in better mechanical properties.

Keywords: A. Nano-structures, E. Thermosetting resin, B. Mechanical properties, B. Thermal properties, E. Resin transfer moulding (RTM)

Publication Notes:

  • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
  • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.

XML: View XML

Citation:


Barari, Bamdad; Ellingham, Thomas K.; Ghamhia, Issam I.; Pillai, Krishna M.; El-Hajjar, Rani; Turng, Lih-Sheng; Sabo, R. 2016. Mechanical characterization of scalable cellulose nano-fiber based composites made using liquid composite molding process. Composites Part B: Engineering. 84: 277-284.

 


 [ Get Acrobat ]  Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility

USDA logo which links to the department's national site. Forest Service logo which links to the agency's national site.