Skip to page content
USDA Forest Service

Research & Development Treesearch

Treesearch Home
About Treesearch
Contact Us
Research & Development
Forest Products Lab
International Institute of Tropical Forestry
Pacific Northwest
Pacific Southwest
Rocky Mountain
Southern Research Station
Help - We Participate  Government Made Easy

Global Forest Information Service

US Forest Service
P.O. Box 96090
Washington, D.C.

(202) 205-8333

You are here: Home / Search / Publication Information
Bookmark and Share

Publication Information

View PDF (1.0 MB byte)

Title: Burning rates of wood cribs with implications for wildland fires

Author: McAllister, Sara; Finney, Mark;

Date: 2016

Source: Fire Technology. doi: 10.1007/s10694-015-0543-5.

Publication Series: Scientific Journal (JRNL)


Wood cribs are often used as ignition sources for room fire tests and the well characterized burning rates may also have applications to wildland fires. The burning rate of wildland fuel structures, whether the needle layer on the ground or trees and shrubs themselves, is not addressed in any operational fire model and no simple model exists. Several relations exist in the literature for the burning rate of wood cribs, but the cribs used to generate them were built with fairly limited geometries. This work explores the burning rate of cribs with a wide variety of geometries and aspect ratios in the loosely-packed regime to evaluate the rigor of several correlations from the literature. Specifically, stick thicknesses ranged from 0.16 cm to 1.27 cm and lengths from 6.4 cm to 61.0 cm resulting in aspect ratios (stick length/ thickness) from 10 cm to 160. As wildland fuel beds occur both directly on the ground and suspended in the air, the effect of the vertical gap between the ground and crib base was also examined. The critical vertical gap was shown to be larger than previously thought (7.6 cm for all cribs) and a function of the aspect ratio. It was quite apparent that as the aspect ratio increases, a significant portion of the required oxidizer comes from the bottom of the crib. A relation is then found to adjust the predicted values for the reduction in burning rate due to insufficient vertical gap.

Keywords: burning rate, cribs, porosity, vertical gap, wildland fire

Publication Notes:

  • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
  • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.



McAllister, Sara; Finney, Mark. 2016. Burning rates of wood cribs with implications for wildland fires. Fire Technology. doi: 10.1007/s10694-015-0543-5.


 [ Get Acrobat ]  Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility

USDA logo which links to the department's national site. Forest Service logo which links to the agency's national site.