Skip to page content
USDA Forest Service
  
Treesearch

Research & Development Treesearch

 
Treesearch Home
About Treesearch
Contact Us
Research & Development
Forest Products Lab
International Institute of Tropical Forestry
Northern
Pacific Northwest
Pacific Southwest
Rocky Mountain
Southern Research Station
Help
 

Science.gov - We Participate


USA.gov  Government Made Easy


Global Forest Information Service

US Forest Service
P.O. Box 96090
Washington, D.C.
20090-6090

(202) 205-8333

You are here: Home / Search / Publication Information
Bookmark and Share

Publication Information

View PDF (8.0 MB bytes)

Title: Fabrication of microfibrillated cellulose gel from waste pulp sludge via mild maceration combined with mechanical shearing

Author: Chen, Nusheng; Zhu, Junyong; Tong, Zhaohui;

Date: 2016

Source: Cellulose, Vol. 23(4). pp. 2573-2583

Publication Series: Scientific Journal (JRNL)

Description: This article describes a facile route, which combines mild maceration of waste pulp sludge and a mechanical shearing process, to prepare microfibrillated cellulose (MFC) with a high storage modulus. In the maceration, the mixture of glacial acetic acid and hydrogen peroxide was used to extract cellulose from never-dried waste pulp sludge. Then, two different mechanical processes including disc refining (DR) and ultrasonication plus homogenization (UH) were applied to the cellulose after maceration and resulted in MFC with a highly tangled fibril network. All of the resultant cellulosic suspensions (2 % w/w) exhibited a gel-like and shear-thinning behavior with storage moduli (G’) ranging from 200 to 4000 Pa. Among them, the 30-min DR-treated MFC gels had the maximum G’, which was much higher than for previously reported MFC gels at the same concentra- tion. Additionally, after mechanical processing, specific surface areas and water retention values of MFC were accordingly increased with the enhancement of shear force, while the storage moduli (G’) were not consistently increased. Finally, a strong MFC gel was successfully prepared from never-dried waste pulp sludge via a one-step disc refining process and using cost effective chemicals. The obtained hydrogels will have potential as low-density reinforcing fillers or as a template for further surface modification.

Keywords: Microfibrillated cellulose (MFC), Disc refining, Ultrasonication plus homogenization, Storage modulus, Microfibrillated cellulose (MFC), Disc refining, Ultrasonication plus homogenization, Storage modulus

Publication Notes:

  • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
  • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.

XML: View XML

Citation:


Chen, Nusheng; Zhu, J.Y.; Tong, Zhaohui. 2016. Fabrication of microfibrillated cellulose gel from waste pulp sludge via mild maceration combined with mechanical shearing. Celluloseol. 23(4): 2573-2583.

 


 [ Get Acrobat ]  Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility

USDA logo which links to the department's national site. Forest Service logo which links to the agency's national site.