Skip to page content
USDA Forest Service
  
Treesearch

Research & Development Treesearch

 
Treesearch Home
About Treesearch
Contact Us
Research & Development
Forest Products Lab
International Institute of Tropical Forestry
Northern
Pacific Northwest
Pacific Southwest
Rocky Mountain
Southern Research Station
Help
 

Science.gov - We Participate


USA.gov  Government Made Easy


Global Forest Information Service

US Forest Service
P.O. Box 96090
Washington, D.C.
20090-6090

(202) 205-8333

You are here: Home / Search / Publication Information
Bookmark and Share

Publication Information

View PDF (1.5 MB)

Title: Lumber value differences from reduced CT spatial resolution and simulated log sawing

Author: Thawornwong, Suraphan; Occena, Luis G.; Schmoldt, Daniel L.;

Date: 2003

Source: Computers and Electronics in Agriculture. 41: 23-43

Publication Series: Miscellaneous Publication

Description: In the past few years, computed tomography (CT) scanning technology has been applied to the detection of internal defects in hardwood logs for the purpose of obtaining a priori information that can be used to arrive at better log sawing decisions. Because sawyers currently cannot even see the inside of a log until the log faces are revealed by sawing, there is little perceived need to obtain scan images as detailed as those obtained in medical CT imaging. Yet, CT scanner speed and the usefulness of CT data for decision-making are dependent on the spatial resolution of scans. Spatial resolution is a function of three factors: physical pixel size, scan thickness, and scan frequency (pitch). A 3x23 factorial experiment was designed with two levels for each of these three factors, to test their effect on lumber values. Three hypothetical logs corresponding to three hardwood log grades were simulation scanned, then simulation-sawed by a human operator using a modified Malcolm opening face heuristic. Log grade affected lumber value recovery as expected, although reduced spatial resolution (by doubling the pitch, thickness, and pixel size) exhibited no discernible pattern in our statistical tests for effects. Volume recovery for below grade boards was predicted very accurately by size, thickness, and pitch-size. The greatest opportunity for lumber value recovery improvement using information-augmented sawing appears to be in grade #2 logs.

Publication Notes:

  • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
  • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
  • You may send email to pubrequest@fs.fed.us to request a hard copy of this publication. (Please specify exactly which publication you are requesting and your mailing address.)

XML: View XML

Citation:


Thawornwong, Suraphan; Occena, Luis G.; Schmoldt, Daniel L. 2003. Lumber value differences from reduced CT spatial resolution and simulated log sawing. Computers and Electronics in Agriculture. 41: 23-43

 


 [ Get Acrobat ]  Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility

USDA logo which links to the department's national site. Forest Service logo which links to the agency's national site.