Skip to page content
USDA Forest Service
  
Treesearch

Research & Development Treesearch

 
Treesearch Home
About Treesearch
Contact Us
Research & Development
Forest Products Lab
International Institute of Tropical Forestry
Northern
Pacific Northwest
Pacific Southwest
Rocky Mountain
Southern Research Station
Help
 

Science.gov - We Participate


USA.gov  Government Made Easy


Global Forest Information Service

US Forest Service
P.O. Box 96090
Washington, D.C.
20090-6090

(202) 205-8333

You are here: Home / Search / Publication Information
Bookmark and Share

Publication Information

View PDF (357 KB bytes)

Title: Liquefaction of the Used Creosote-Treated Wood in the Presence of Phenol and Its Application to Phenolic Resin

Author: Shiraishi, Nubuo; Hse, Chung-Yun;

Date: 2000

Source: Wood Ashesives 2000, Session 3B: Advances in Wood Ashesive Formulations, 259-266

Publication Series: Miscellaneous Publication

Description: A limited initial study was made to evaluate liquefaction of creosote-treated southern pine wood sawdust with liquefaction of birch wood powder as a control. The objective was to assess the feasibility of using creosote-treated southern pine wood as a raw material for the-formulation-of-phenol-based resin adhesives. The liquefaction was conducted in the presence of phenol with sulfuric acid as a catalyst at reaction temperature and time of 150°C and 60 minutes, respectively. Novolac and resole resins were formulated from the liquefied wood, and their physical and mechanical properties of molding compounds made with them were determined. Residues obtained from samples of liquefied creosote-treated wood (5.8%) were significantly lower than those from non-treated birch wood powder (17.3%). Apparently, the residual creosote content of the treated-wood behaved as a reagent co-working with phenol to enhance the liquefaction. The flexural strength and the flexural modulus of moldings made from novolac resins prepared from liquefied creosotetreated wood were comparable to novolacs made from non-treated birch wood. Bond quality of southern pine plywood made from liquefied creosote-treated wood resin was only slightly lower than plywood made from conventional phenolic resin. Visual examination of the wood failure on broken shear specimens seemed to indicate overpenetration of the resin made from liquefied creosote-treated wood, and it was probably one of the major causes of lower bond quality. Nevertheless, the first attempt to formulate a phenol-based adhesive made from liquefied creosote-treated wood produced encouraging results. With additional studies. of resole formation and glue mix formulations, it is anticipated that a resin adhesive from liquefied creosote-treated wood with improved bond quality can be developed.

Publication Notes:

  • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
  • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
  • You may send email to pubrequest@fs.fed.us to request a hard copy of this publication. (Please specify exactly which publication you are requesting and your mailing address.)

XML: View XML

Citation:


Shiraishi, Nubuo; Hse, Chung-Yun 2000. Liquefaction of the Used Creosote-Treated Wood in the Presence of Phenol and Its Application to Phenolic Resin. Wood Ashesives 2000, Session 3B: Advances in Wood Ashesive Formulations, 259-266

 


 [ Get Acrobat ]  Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility

USDA logo which links to the department's national site. Forest Service logo which links to the agency's national site.