Skip to page content
USDA Forest Service
  
Treesearch

Research & Development Treesearch

 
Treesearch Home
About Treesearch
Contact Us
Research & Development
Forest Products Lab
International Institute of Tropical Forestry
Northern
Pacific Northwest
Pacific Southwest
Rocky Mountain
Southern Research Station
Help
 

Science.gov - We Participate


USA.gov  Government Made Easy


Global Forest Information Service

US Forest Service
P.O. Box 96090
Washington, D.C.
20090-6090

(202) 205-8333

You are here: Home / Search / Publication Information
Bookmark and Share

Publication Information

View PDF (5.4 MB bytes)

Title: Effect of environmental conditions on the flexural properties of wood I-beams and lumber

Author: Chen, Gwo-Huang; Tang, R.C.; Price, E.W.;

Date: 1989

Source: Forest Products Journal 39(2):17-22

Publication Series: Miscellaneous Publication

Description: Flexural properties as affected by environmental conditions were evaluated for full-sized wood composite I-beams webbed with oriented strand board (OSB), randomly oriented flakeboard (RF) and 3-ply Structural I plywood (PLY). Solid-sawn southern pine 2 by 10's, ordinarily used in light-frame building construction, were also tested for comparative purposes. Environmental conditions selected were 65 percent relative humidity (RH) (dry), 95 percent RH (humid) at 75°F, and 24-hour water-spraying (wet) at ambient temperature. In the dry condition, the OSB group carried the largest load among the four beam types, but the load capacities of the four beam types were not significantly different in the humid and wet conditions. Deflections at maximum load of the four beam types were significantly different in the three environmental conditions. The value for the lumber group was consistently higher than the I-beam types in each test condition. Loads at I-inch deflection for the four beam types were also significantly different in the three environmental conditions. However, the value for the lumber group was consistently lower than those of the I-beam types. In the dry condition, most failures that occurred in the PLY group were in shear mode, while the majority of the OSB and RF members failed in bending, and the failures occurred in the flanges. In the humid condition, most of the I-beam and lumber specimens failed in shear and bending, respectively. In the wet environment, however, most of the I-beams failed in web buckling, while most of the lumber members failed in bending.

Publication Notes:

  • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
  • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
  • You may send email to pubrequest@fs.fed.us to request a hard copy of this publication. (Please specify exactly which publication you are requesting and your mailing address.)

XML: View XML

Citation:


Chen, Gwo-Huang; Tang, R.C.; Price, E.W. 1989. Effect of environmental conditions on the flexural properties of wood I-beams and lumber. Forest Products Journal 39(2):17-22

 


 [ Get Acrobat ]  Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility

USDA logo which links to the department's national site. Forest Service logo which links to the agency's national site.