You are here: Home
/ Publication Information
Title: New curing system for urea-formaldehyde resins with polyhydrazides. I. Curing with poly(methycrylol hydrazide)
Author: Miyake, Katsumasa; Tomita, Bunichiro; Hse, Chung-Yun; Myers, George E.;
Source: Mokuzai Gakkaishi 35(8):736-741
Publication Series: Miscellaneous Publication
Description: A new curing system for urea-formaldehyde (UF) resins was investigated using poly(methacryloyl hydrazide) as the curing reagent. Results were as follows: 1) Gel time and the water-soluble part of cured resins were determined as function of pH and molar ratio [hydrazide group/(free formaldehyde+methylol group)]. It was found that the reaction in this system proceeds for a short time under neutral conditions, and that the reaction of hydrazide groups with UF resin involves two stages with the second stage occuring at a rather high temperature. 2) The adhesive shear strength of lap-joint specimens prepared under the new system was comparable to that by conventional curing with ammonium chloride, although it decreased after watersoaking at 60°C. 3) The adhesive strength of plywood specimens decreased as the molar ratio increased.
- We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
- This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.
- You may send email to firstname.lastname@example.org to request a hard copy of this publication. (Please specify exactly
which publication you are requesting and your mailing address.)
XML: View XML
Miyake, Katsumasa; Tomita, Bunichiro; Hse, Chung-Yun; Myers, George E. 1989. New curing system for urea-formaldehyde resins with polyhydrazides. I. Curing with poly(methycrylol hydrazide). Mokuzai Gakkaishi 35(8):736-741
Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility