Skip to page content
USDA Forest Service
  
Treesearch

Research & Development Treesearch

 
Treesearch Home
About Treesearch
Contact Us
Research & Development
Forest Products Lab
International Institute of Tropical Forestry
Northern
Pacific Northwest
Pacific Southwest
Rocky Mountain
Southern Research Station
Help
 

Science.gov - We Participate


USA.gov  Government Made Easy


Global Forest Information Service

US Forest Service
P.O. Box 96090
Washington, D.C.
20090-6090

(202) 205-8333

You are here: Home / Search / Publication Information
Bookmark and Share

Publication Information

View PDF (518 KB bytes)

Title: Effect of low relative humidity on properties of structural lumber products

Author: Green, David W.; Evans, James W.;

Date: 2003

Source: Wood and fiber science. Vol. 35, no. 2 (2003): Pages 247-265

Publication Series: Miscellaneous Publication

Description: Wood used in industrial settings, and in some arid parts of the United States, may be subjected to very low relative humidity (RH). Analytical models available for predicting the effect of moisture content (MC) on the properties of solid-sawn lumber imply significant strength loss at very low MC. However, these models are generally valid only for MC above about 10%. The objective of this study was to evaluate the flexural and tensile properties of standard 38-by 89-mm (nominal 2-by 4-in.) dimension lumber equilibrated at 15% RH compared with lumber at 65% RH. Testing was done on solid-sawn lumber, laminated veneer lumber (LVL), and laminated strand lumber (LSL). The results of this study indicate that modulus of elasticity (MOE) in transverse vibration was about the same for lumber equilibrated at 15% and 65% RH for solid-sawn lumber and LVL, whereas LSL, at 15% RH was slightly higher in MOE than that at 65% RH. For solid-sawn lumber, the modulus of rupture (MOR) at 15% RH was found to be up to 8% less than that at 65% RH, whereas there was little difference between the two RH levels for LVL and LSL. The ultimate tensile stress of solid-sawn lumber and LVL was found to be about 10% lower at 15% RH, but there was little difference between the two RH exposures for LSL. The models of the American Society for Testing and Materials standard D1990 predicted the average shrinkage of the solid-sawn lumber, but none of the models adequately predicted mechanical properties after equilibration at 15% RH compared with those at 65% RH. Procedures are suggested for estimating allowable properties at 4% MC from currently assigned properties at 15% MC.

Keywords: Lumber, laminated veneer lumber, laminated strand lumber, modulus of rupture, modulus of elasticity, ultimate tensile stress, moisture content

Publication Notes:

  • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
  • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.

XML: View XML

Citation:


Green, David W.; Evans, James W. 2003. Effect of low relative humidity on properties of structural lumber products. Wood and fiber science. Vol. 35, no. 2 (2003): Pages 247-265

 


 [ Get Acrobat ]  Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility

USDA logo which links to the department's national site. Forest Service logo which links to the agency's national site.