Skip to page content
USDA Forest Service
  
Treesearch

Research & Development Treesearch

 
Treesearch Home
About Treesearch
Contact Us
Research & Development
Forest Products Lab
International Institute of Tropical Forestry
Northern
Pacific Northwest
Pacific Southwest
Rocky Mountain
Southern Research Station
Help
 

Science.gov - We Participate


USA.gov  Government Made Easy


Global Forest Information Service

US Forest Service
P.O. Box 96090
Washington, D.C.
20090-6090

(202) 205-8333

You are here: Home / Search / Publication Information
Bookmark and Share

Publication Information

View PDF (1.6 MB bytes)

Title: Effect of drying temperature on warp and downgrade of 2 by 4's from small-diameter ponderosa pine

Author: Simpson, William T.;

Date: 2004

Source: Res. Pap. FPL-RP-624. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory: 8 pages

Publication Series: Research Paper (RP)

Description: Kiln drying at high temperature may reduce warp in dimension lumber sawn from small-diameter trees. In this study, we examined the effect on warp of high drying temperatures in conjunction with top loading immediately after drying and after storage in typical conditions that result in further moisture loss. Eight-foot-long 2- by 4-in. (2 by 4) boards sawn from open-grown, 30- to 35-year-old, 9-in.-diameter at breast height ponderosa pine trees were kiln dried at three temperatures, 160°F, 230°F, and 280°F. Crook, bow, and twist were measured and compared. Total grade loss from exceeding Structural Light Framing grade warp limits was also measured. Crook, bow, and twist measured after boards had equilibrated to 14% moisture content decreased by 12%, 29%, and 20%, respectively, with increase in kiln drying temperature from 160°F to 280°F. Total grade loss caused by all forms of warp was 24% lower in boards dried at 230°F than at 160°F and 39% lower in boards dried at 280°F than at 160°F. When boards were equilibrated to 4% to 5% moisture content, warp and grade loss from warp increased significantly.

Keywords: kiln drying, ponderosa pine, small-diameter timber, drying degrade

Publication Notes:

  • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
  • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.

XML: View XML

Citation:


Simpson, William T. 2004. Effect of drying temperature on warp and downgrade of 2 by 4''s from small-diameter ponderosa pine. Res. Pap. FPL-RP-624. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory: 8 pages

 


 [ Get Acrobat ]  Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility

USDA logo which links to the department's national site. Forest Service logo which links to the agency's national site.