Skip to page content
USDA Forest Service
  
Treesearch

Research & Development Treesearch

 
Treesearch Home
About Treesearch
Contact Us
Research & Development
Forest Products Lab
International Institute of Tropical Forestry
Northern
Pacific Northwest
Pacific Southwest
Rocky Mountain
Southern Research Station
Help
 

Science.gov - We Participate


USA.gov  Government Made Easy


Global Forest Information Service

US Forest Service
P.O. Box 96090
Washington, D.C.
20090-6090

(202) 205-8333

You are here: Home / Search / Publication Information
Bookmark and Share

Publication Information

View PDF (541 KB bytes)

Title: Kiln drying lumber in the United States : a survey of volume, species, kiln capacity, equipment, and procedures, 1992-1993

Author: Rice, Robert W.; Howe, Jeffrey L.; Boone, R. Sidney; Tschernitz, John L.;

Date: 1994

Source: Gen. Tech. Rep. FPL-GTR-81. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory. 24 p.

Publication Series: General Technical Report (GTR)

Description: A survey was conducted of primary and secondary manufacturing firms that have at least one dry kiln and process approximately 2 million board feet or more of lumber annually. More than 1,500 surveys were completed, representing manufacturers in 43 states. According to survey respondents, approximately 5 billion board feet of hardwood lumber and 24 billion board feet of softwood lumber were kiln dried annually. Drying data were collected for 48 commercial species or species groups and volume information was reported by state and region. The 13-state southern region dried more than twice as much wood as any other area. There were more than 7,000 dry kilns in the United States with a holding capacity of 447 million board feet. This capacity varied by species and region. The majority of kilns were steam heated. The most common maximum operating temperature was between 160°F and 180°F. The decision to use time-based or moisture-content-based kiln schedules depended on the species being dried. Generally, softwood producers used time-based schedules and hardwood producers used moisture-content-based schedules. This is the first national survey of its type to be conducted in the United States. It provides information that may be used to further examine drying practices in the United States.

Keywords: Drying lumber, dry kilns, drying methods

Publication Notes:

  • We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
  • This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain.

XML: View XML

Citation:


Rice, Robert W.; Howe, Jeffrey L.; Boone, R. Sidney; Tschernitz, John L. 1994. Kiln drying lumber in the United States : a survey of volume, species, kiln capacity, equipment, and procedures, 1992-1993. Gen. Tech. Rep. FPL-GTR-81. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory. 24 p.

 


 [ Get Acrobat ]  Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility

USDA logo which links to the department's national site. Forest Service logo which links to the agency's national site.